Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Swapping 3y for 2.4d

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 75
Joined: Thu Jul 14, 2005 6:32 pm
Location: Where ever the mud is!....in townsville.

Swapping 3y for 2.4d

Post by Outer Limits Hilux »

how hard is it?
how much am i looking at?
it comes as a whole package from motor to t-case, will it bolt straight up to a 85 4runner?
what about turboing the 2.4d, go any harder?
whats your comments?
Wanted.... 4.88 or 4.56 front GQ diff center. Also wanted... GQ rear diff complete.
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

I`m doing the visa versa with putting a 4Y to replace the 2.4D,I`m just stripping them both down and swapping everything over,wiring harness to everything in the engine bay and the speedo
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 461
Joined: Thu Jan 01, 2004 7:23 pm
Location: Kuala Lumpur, Malaysia

Contact:
Contact BabyGodzillaGTi-R

Post by BabyGodzillaGTi-R »

Well since i've a 2.8 turbo hilux and a 3Y.
I would say a 3Y would go harder than a 2.4 turbo.
I guess it depends on what terrain.

My Rocky with a 3Y was dynoed at 95hp ATW. I guess its no big deal. Did abit of work. Fully blue printed and balanced, 2mm oversize pistons, Weber DCNF40, Perry extractors and exhaust.
My RIG sucks big time.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests