Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wing removal

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

wing removal

Post by lexi »

What`s the go with getting front wings off a GQ. Is it all bolts after removing doors for access or are there any spot welds?
Cheers Alex
Top
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Contact:
Contact GRINCH

Post by GRINCH »

what do yoy meanby front wing?
Top
Posts: 228
Joined: Mon Oct 17, 2005 12:55 pm
Location: Taree Australia

front guards

Post by rockrover »

the front guards(wings) are bolted and glue i think from memory
Cheers Bourkey
rn106r 100watt hid lightforce 30 inch light bar 1 ton tipper and more to come
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

I mean the part where the Patrol 4x4 badge is. Anyone renewed them? Screwed and glued? Any procedure for removing them for replacement?
Alex
Top
Posts: 196
Joined: Sun Mar 26, 2006 5:31 pm
Location: Redcliffe, Brisvegas

Contact:
Contact zer0

Post by zer0 »

long flat piece of steel and slide it along under neath

(note this will scratch car)
GIVE IT SOME S**T
my build http://www.outerlimits4x4.com/viewtopic.php?t=74420
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

"wings"

Post by badger »

try a hair dryer and peel carefully
Top
Posts: 736
Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane

Post by chops »

claw hammer


:finger:
1988 351W GQ wagon
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

sorry guys I don`t mean the badge itself but the whole front gaurd. I can see where it bolts along inner gaurd and would asume there may be a few other bolts once door is removed for access. It`s just that if there are no dramas with spot welds I may renew them as I have bubbling on the edges.
Alex
Top
Posts: 172
Joined: Thu Jul 15, 2004 7:34 am
Location: Denmark

Contact:
Contact Hobbz

Post by Hobbz »

remove the plastic inner guard, undo the screws "in" the engine bay, open the door and you can unscrew the last 2 .... no problem at all ...
GQ 2.8TD. OME. 35 BFG. Fact. Rear Locker on steroids. Air Locker front. Gearmaster Reduction. 6HP Warn 8274.
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

gaurd

Post by badger »

to quote chops
claw hammer


im sure itd still work :P
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

Thanks Hobbz. That`s what I was hoping.
Alex
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest