Gday,
just wondering if anyone could help me with an LJ50. It was crashed on a farm once upon a time I wanted to know if anyone could give me hints on how to remove the its old dilapidated body. All the seats have been removed....
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LJ50 body removal
two bolts at the back, two about front of door frame, and three across the front. Also two studs underneath about level with seatbacks.
Undo the rag joint on the steering column.
Remove the fuel filler hose.
Hand brake cable and speedo cable out.
Disconnect the clutch cable.
Disconnect brake lines from the master cylinder.
Disconnect light wires.
That should be about it I think.
Then get a mate (or ya missus) to help lift the body off (or just lift it off youself if it don't really matter what happens to it)
Undo the rag joint on the steering column.
Remove the fuel filler hose.
Hand brake cable and speedo cable out.
Disconnect the clutch cable.
Disconnect brake lines from the master cylinder.
Disconnect light wires.
That should be about it I think.
Then get a mate (or ya missus) to help lift the body off (or just lift it off youself if it don't really matter what happens to it)
'03 Mazda Bravo Plus
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
Who is online
Users browsing this forum: Google [Bot] and 1 guest