Bundera Engine Conversion- COMPLETED!!

Post by **Skip** » Sat Aug 09, 2003 4:33 pm

Looks like me and BUNDERA are soon to have twin turbo 6 cylinder Toyota power. Here is a pic of the 1JZGTE I purchased today.

Post by **roscoFJ73** » Sun Aug 10, 2003 11:02 am

Whats that out of skip ? supra? Also just to let you know there is a gymkana on sept 27-28 AT WEST BULLSBROOK run by the west coast 4x4 club . There is 5 divisions based on modifications I think it goes day and night on sat and all day sunday its also a long w/e :twisted:

You can have a look at their website .Im not a member just spreadin the word

Post by **BUNDERA** » Sun Aug 10, 2003 3:42 pm

Hey Skip....

RESPECT!!

Only a couple more days till mine arrives!!

Yours is 2.5L twin turbo isn't it.

Looks Great,
Regards,
Nick

Post by **Skip** » Mon Aug 11, 2003 10:19 am

Yeah it's a 2.5L, it's either out of a JZA70 Supra or Soarer. You will have your conversion completed alot sooner than me, im still waiting for my car to arrive!!!!

The dump pipe off the turbo looks really restrictive, I am going to make two seperate dump pipes out of stainless steel. Ive already pulled all the piping off the turbos, aswell as the water and oil lines. I tried to remove the turbos and exhaust manifolds but the nuts are pretty seized on the studs due to a little rust and the temperature changes. Hopefully I can remove them by heating them with the oxy/acytelene, then quenching with water.

Post by **robbie** » Mon Aug 11, 2003 9:57 pm

nick, where are you at with this conversion man?

Post by **droopypete** » Mon Aug 11, 2003 9:57 pm

You guy's sure are men of action, I am impressed.
Peter.

Post by **BUNDERA** » Tue Aug 12, 2003 9:36 am

Robbie, long time no PAD! how u been?

My half cut should arrive tomorrow (Wednesday) or Thursday at the very latest!

Hey Skip I need to replace one of the turbos (the rear one) on mine (they are sending another one for free with the cut)...I hope that it comes off ok and is not a pain to get off.

Post up some more pics skip! (it will help me sleep!)

Cheers,
Nick

Post by **Skip** » Tue Aug 12, 2003 1:23 pm

Do you know what model turbos they are BUNDERA? Mine are CT12A. I eventually got the turbos off, sprayed some lubricant stuff on the nuts like WD40, let it soak for a day. I put a 14mm spanner on, then locked a 26mm spanner into it and lent on that, they took some major weight swinging off the spanner to crack them. A couple of the studs unscrewed instead off the nut coming off

Post by **BUNDERA** » Tue Aug 12, 2003 3:04 pm

Mine are CT12's not sure if they are CT12A's.

We need some more pics!!!

I'll get out the WD-40 as soon as it arrives!

What sized exhaust are u going to run. I am going 3" most probably..No cat and just 1 lukey muffler (totally legal in tassie :lol:

)

cheers,
Nick

Post by **Skip** » Tue Aug 12, 2003 10:20 pm

Im going to run twin 2.5" pipes off the turbos, merging into a 3" system, not too sure about muffler. I still have to find out whether ill need a catalytic converter or not. AFAIK if you upgrade the engine on a pre catalytic converter car with an engine that came with a catalytic conveter from the factory, you still dont have to use a catalytic converter, hope that made sense. I don t know about cars that once had a diesel engine fitted though.

Ill try and post some pics tomorrow night.

Post by **BUNDERA** » Wed Aug 13, 2003 8:28 am

Looking forward to seeing these pictures!

I am going to do the same setup. 2.5" off each turbo and 3" from then on.

Engine Should Arrive TODAY!!!

Nick

Post by **robbie** » Wed Aug 13, 2003 11:44 am

keyword: should

Post by **BUNDERA** » Wed Aug 13, 2003 3:22 pm

yeah I know robbie you can never get your hopes up when they say it will arrive cos stuff never arrives on time.

I dont really mind if it doesn't arrive today cos I know it will get here by tomorrow no matter what. 1 more sleep wont hurt. (it left Devenport This morning which is a 3 hour drive away)

I just replaced the Passenger side wheel bearing and oil seals...

(12 Minutes 33 Seconds to get the axle out including taking the wheel off and jacking the vehicle!!)

Looks like I might have been spending a little too much time in the mud!!

Rocks mainly from now on!

Hows your bundy goning Robbie?

Nick

PS:Skip dont forget those pics tonight!!

Post by **RUFF** » Wed Aug 13, 2003 8:49 pm

BUNDERA wrote:

(12 Minutes 33 Seconds to get the axle out including taking the wheel off and jacking the vehicle!!)

Dude there is only 4 bolts a brake line and a split pin after removing the wheel.

Did you stop for a beer :?:

Post by **BUNDERA** » Wed Aug 13, 2003 8:53 pm

3 actually!!

included draining the oil (all of one bolt

)

I have ripped that bastard out that many times it isn't funny. Can do it wif me eyes closed.

WHere are the pics skip

Nick

Post by **Skip** » Wed Aug 13, 2003 9:22 pm

Sorry mate no pics, my home and work computers have been hit by this stupid worm blaster virus. Pics will come when I get properly sorted out again, need to get windows service packs etc. Compute could crash at any min...

Post by **dumbdunce** » Thu Aug 14, 2003 7:53 am

does that 12 minutes include changing the CV including breaking the old one off the shaft and putting it all back together?

Post by **BUNDERA** » Thu Aug 14, 2003 9:35 am

no cv joints in my rear axle last time I checked.

Post by **dumbdunce** » Thu Aug 14, 2003 9:49 am

ahh, rear. the '4 bolts' bit should have given it away. see they don't call me dumb for nothing ;)

I hate changing them steeeeenking rear wheel bearings. with the disc conversion it's better, no brake plate in the way, no need to disconnect brake hydraulics, but they still fully suck.

Post by **BUNDERA** » Thu Aug 14, 2003 9:51 am

have you got rear disc on yours?

PICS!!! NOW!!

Where did u get it from.

Post by **dumbdunce** » Thu Aug 14, 2003 10:03 am

you're in luck, it just so happens it's standing in the driveway with a back wheel off so I will go give it a clean and take a few pics.

the discs are GQ patrol rears. the calipers are Subaru sportswagon, about 1984 I think. handbrake in the disk calipers, handbrake works well. the proportioning front/rear is screwed but it stops pretty well, better than it ever did with drum rear. the brackets I fabbed from 8mm plate, if you're super keen I can pull the brakets and make templates from them.

Post by **dumbdunce** » Thu Aug 14, 2003 10:28 am

back brakes pics 1,2

Post by **dumbdunce** » Thu Aug 14, 2003 10:31 am

rear brakes pics 3,4

Post by **dumbdunce** » Thu Aug 14, 2003 10:35 am

rear brakes pics 5,6

Post by **BUNDERA** » Sat Aug 16, 2003 7:12 pm

Thanks for those pics skip... it is something that I will look into after I finish this conversion.

Engine arrived on Thursday. Bribed Freight Company to bring it to my place on the back of a ute for a carton of beer.

So I got the engine on Friday morning first thing. Looks to be in good condition.

Started removing all the dash and shiat to get the wiring loom and computer out.

Any way did heaps today and last night. I have finished for the day and the engine is proudly hanging off the ceiling down stairs with 1/2 a GA70 Supa underneath it.

Got the gearbox out and is in good nic. Look in the for sale section for more details.

Anyway, tomorrow I will clean up my mess and take alot of this crap to the tip. Afterthat I will see how it looks in the bundy!! :cool:

Bellhousing matchs perfectly BTW!

Regards,
Nick

Only took 1/2 pic and that was when the thing arrived. Will post them up later..

Post by **dumbdunce** » Sat Aug 16, 2003 7:23 pm

where'd my brake pics go? :-/

Post by **BUNDERA** » Sat Aug 16, 2003 7:35 pm

they were there before....hmmmm

210HP!!

Post by **RUFF** » Sun Aug 17, 2003 10:04 am

dumbdunce wrote:where'd my brake pics go? :-/

http://www.outerlimits4x4.com/PHP_Modul ... php?t=6474

Post by **dumbdunce** » Mon Aug 18, 2003 7:45 am

ooh. funky.

Post by **Bundytime** » Mon Aug 18, 2003 6:30 pm

sorry to cut in but i'm keen for those templates and i have a mate with a plasma cutter too.

How does the bearing fit?????

Thanx Daniel

Outer Limits 4x4 Board

Bundera Engine Conversion- COMPLETED!!

Who is online