Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will 305/70/16 Fit under an 80 with 3" lift?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Will 305/70/16 Fit under an 80 with 3" lift?

Post by Surfin Alec »

Just want to make sure that 305/70/16 BFG's will fit on the 80 no probs with a 3" lift. On the coversion chart, from what I can make out, they appear to measure 33/12.5".

I am putting it all on this Saturday and dont want any surprises.

Also, will the sway bars go back on without extensions for the short term till I get spacers made?

Thanks,

Alec
GO the 80...The mods have started :-)
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

they will fit easy as..

u can fit 35's easy on that lift
Top
Posts: 96
Joined: Fri Apr 09, 2004 9:24 pm

spacers

Post by dubs »

fit spacers mate.Was some on here for sale just recently
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

I'll soon be fitting the 295 /75/16 BFG's to my 105 series and yes those tyres will fit easy as there the same height as a 285/75/16 just wider...HYPOZOOK has 315's on his 80 with 3" lift he also cleared them on his old 80 with slight scrapping with no lift
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 849
Joined: Fri Apr 23, 2004 12:30 pm
Location: Mornington, Vic

Contact:
Contact MYTTUF

Post by MYTTUF »

Yes to both Q!!
Jonesy
80 series, Locked both ends, Q78ed & a massive 57 k/w to boot!!!!

www.autobalance.com.au
Top
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Post by Surfin Alec »

Ta guys. Gettin me some new donuts and lift tomorrow..... :cool:

Alec
GO the 80...The mods have started :-)
Top
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Post by jimbo jones »

crankycruiser wrote:they will fit easy as..

u can fit 35's easy on that lift

35s will scrub with 3" lift I tryed if on my truck and I had to go to a 4" to fit them
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Posts: 233
Joined: Tue Oct 11, 2005 7:35 am
Location: Bankstown

Post by Dingo »

Surfin Alec wrote:Ta guys. Gettin me some new donuts and lift tomorrow..... :cool:

Alec
So when does the locker go in. :D
95 Surf 3.0l Turbo 2"lift, ARB bar+winch+Rear Locker
[url=http://rag4x4.hyperboards.com][i][size=134]R.A.G 4x4(Ruff~As~Gutts)[/size][/i][/url]
Top
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Post by Surfin Alec »

Dingo wrote:
Surfin Alec wrote:Ta guys. Gettin me some new donuts and lift tomorrow..... :cool:

Alec
So when does the locker go in. :D
I pick up the rear locker next week. The front is on the shed floor.

I'm a bit dissapointed though, I put in an OME suspension kit, whick I was told was a 3" kit. Later found it was a 2.5" kit, then it only gave me a 2" lift. But the 305's look cool and fit nice. So what do I do ? Complain or just go with it as it still looks allright....for a family truck :?

Alec
GO the 80...The mods have started :-)
Top
Posts: 1344
Joined: Thu Jan 12, 2006 10:12 am
Location: sydney

Contact:
Contact sniper

Post by sniper »

Looking forward to seeing it Alec :)
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Alec
the lift will depend on how heavy your cruiser is, what motor is in it, what model it started out being (1992 and b4 (s1) were 1 inch higher then the twincams and later (s2)) and how much she has sagged....
Andrew
Top
Posts: 233
Joined: Tue Oct 11, 2005 7:35 am
Location: Bankstown

Post by Dingo »

Surfin Alec wrote:
I pick up the rear locker next week. The front is on the shed floor.

Knew it wouldn't be far away :D

I'm a bit dissapointed though, I put in an OME suspension kit, whick I was told was a 3" kit. Later found it was a 2.5" kit, then it only gave me a 2" lift. But the 305's look cool and fit nice. So what do I do ? Complain or just go with it as it still looks allright....for a family truck :?

Question is do they scrub on full compression, if so you know you won't be happy
Alec
95 Surf 3.0l Turbo 2"lift, ARB bar+winch+Rear Locker
[url=http://rag4x4.hyperboards.com][i][size=134]R.A.G 4x4(Ruff~As~Gutts)[/size][/i][/url]
Top
Posts: 1344
Joined: Thu Jan 12, 2006 10:12 am
Location: sydney

Contact:
Contact sniper

Post by sniper »

sounds like he should test it at Appin or Newnes ;)
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest