Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Is bellhousing same from TB42 and TD42??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Is bellhousing same from TB42 and TD42??

Post by CB0569 »

It has crossed my mind to put a 4.2TD in my Mav.Will the diesel block bolt to the manual bellhousing from the 4.2 carby block???
What about exhaust???
Thanks
Top
Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Post by AFeral »

The bell housings are different.
Exsaust should fit.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Top
Posts: 187
Joined: Fri Oct 10, 2003 10:15 am

Post by swbpatrol »

the only difference in bellhousing is an extra hole for the starter which can be easily tapped
Top
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Post by CB0569 »

o.k. fair call.
Well then,if i unbolt the bellhousing from a diesel manual will that bolt to the gearbox of a petrol motor.

REASON: i dont want to have to change the gearbox and trasfer case if i dont have to.
Top
Posts: 897
Joined: Tue Aug 02, 2005 2:31 am
Location: Central Coast

Contact:
Contact MyGQ

Post by MyGQ »

The gearbox is the same, so if you get a diesel bellhousing it will bolt straight onto the petrol gearbox without any worries
AA's for Quitters
Top
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

I just did a search and thought i would bring this old thread back to life.

I have been considering doing a manual conversion after i blew my auto up recently and can get a GU TD42T manual box and bellhousing. After reading this thread i believe i can just drill and tap an extra hole to fit to my TB45 engine.

BUT then i read this thread, which says they are different. And then to confuse me more a friend told me the TD42 starter motors are in different positions.

http://www.outerlimits4x4.com/viewtopic ... ellhousing

If anyone knows for SURE !!!! what differences exist then please reply. I don't want any think so's. :)
98 GU Patrol. 4.0L Barra, BF engine. 3" Lift. 85% Marks reduction Gears. 35x12.5x15 Maxxis Bighorns, 3" Zaust.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=86831&start=210
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 22 guests