I'm after info on the manual gearbox that came behind a 1979 effie with a 302.
Model # ratios etc. 4wd the same as 2wd? Crushu ? any one ....
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
F100 gearbox.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
CRUSHU wrote:sorry mate, I don't know what a 302 is......
Is your a import, or Aussie? I can try and have a quick look thru my workshop manuals tonight if you want.
you taking the piss ?The 302 is a ford motor of 8 cylinders, It looks like two 4 cylinder mtrs joined together in a V configuration. It has a capacity of 302 cubic inches.
Came out in a lot of different fords.
Gee, sorry about the poor humour.... but yours could be a 302 windsor if it has been modified, or is an import, or could be a 302 clevo. Good thing about 302 clevo's is they were only made here, so no-one across the pond believe they exist.
In fact, my Aussie only lists the 302 clevo for the 1974 - 1977 model F100, and it comes with the T18 gearbox, if I read it correctly.
The 250 and 5.8 come with the np 435 box, with the following ratio's:
1st 6.69
2nd 3.34
3rd 1.79
4th 1.00
rev 8.26
the 1974 - 1977 F250 4x4 had the 1.66 3rd gear, as previously stated
Sorry, but I only really play with auto's, and the best bit in my opinion, in a F truck application, about 302 clevo's is that they can hide a 351 crank really easily, or that a 400 will fit with only bellhousing and engine mounts.
In fact, my Aussie only lists the 302 clevo for the 1974 - 1977 model F100, and it comes with the T18 gearbox, if I read it correctly.
The 250 and 5.8 come with the np 435 box, with the following ratio's:
1st 6.69
2nd 3.34
3rd 1.79
4th 1.00
rev 8.26
the 1974 - 1977 F250 4x4 had the 1.66 3rd gear, as previously stated
Sorry, but I only really play with auto's, and the best bit in my opinion, in a F truck application, about 302 clevo's is that they can hide a 351 crank really easily, or that a 400 will fit with only bellhousing and engine mounts.
www.CVEPerformance.com
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
6.69:1 first gear 
Bill has either a T18 or an NP435 in his IIA, behind a 2.25 petrol, and with a series T-case. I think he once mentioned how he did the conversion. He only seems to post on pirate these days, under the name Agrover.
Also, if I remember correctly, Sam overton had either a T18 or an NP435 in the first iteration of the mogrover, with a rover V8 and an LT95 T-case (combined case cut in half). So I think it can handle the power of a 202!!!
Anyway - forgot to say - good move!
Also, if I remember correctly, Sam overton had either a T18 or an NP435 in the first iteration of the mogrover, with a rover V8 and an LT95 T-case (combined case cut in half). So I think it can handle the power of a 202!!!
Anyway - forgot to say - good move!
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Hi Ben - yeah the C4 was going to cost big$$$$ISUZUROVER wrote:Bill has either a T18 or an NP435 in his IIA, behind a 2.25 petrol, and with a series T-case. I think he once mentioned how he did the conversion. He only seems to post on pirate these days, under the name Agrover.
Also, if I remember correctly, Sam overton had either a T18 or an NP435 in the first iteration of the mogrover, with a rover V8 and an LT95 T-case (combined case cut in half). So I think it can handle the power of a 202!!!
Anyway - forgot to say - good move!
Picked up this cheap and looks to be in great condition.I'm going to look into the np205 t-case (hopefully the 2wd np435 can fit. I know nothing about these yankie things) or keep the series case.
Don't the f-truck and jeep cases have the wrong side drop???popeye wrote: I'm going to look into the np205 t-case (hopefully the 2wd np435 can fit. I know nothing about these yankie things) or keep the series case.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Road Ranger
run divorced and flip the case??ISUZUROVER wrote:Don't the f-truck and jeep cases have the wrong side drop???popeye wrote: I'm going to look into the np205 t-case (hopefully the 2wd np435 can fit. I know nothing about these yankie things) or keep the series case.
If the above post did not offend you in any way please PM me so I can try harder!!
up to the nineties (I think) or at least the last of the CJ's and full size Jeep stuff was the correct (right) side, so a Dana 20, 300, etc go the 'right' way.ISUZUROVER wrote:Don't the f-truck and jeep cases have the wrong side drop???popeye wrote: I'm going to look into the np205 t-case (hopefully the 2wd np435 can fit. I know nothing about these yankie things) or keep the series case.
300Tdi Defender 130 CC
Who is online
Users browsing this forum: No registered users and 93 guests