what's the easiest, quickest way to get these out of the front housing without any specialised tools, without marking the housing, and with the least amount of swearing involved??
Ta.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
inner axle oil seal removal
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...
Home made slide hammer.
600mm length of threaded rod, couple of nuts and thick washer at one end, same on other end with old steel body lift block as hammer. slide 'hammer' back and forth to remove seal (round washer shouldn't damage seal surface with a bit of electrical tape around it) and yell triumphantly 'WHO DA MAN!' YEAH!
600mm length of threaded rod, couple of nuts and thick washer at one end, same on other end with old steel body lift block as hammer. slide 'hammer' back and forth to remove seal (round washer shouldn't damage seal surface with a bit of electrical tape around it) and yell triumphantly 'WHO DA MAN!' YEAH!
Last edited by Area54 on Mon Aug 18, 2003 11:50 am, edited 1 time in total.
tried the slide hammer bit last week ...gave up and hit the seal inwards with a screwdriver to bend it out of shape and it then came out by hand.
shane
[ i may be rough but i'm expensive ]
shane
[ i may be rough but i'm expensive ]
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
event pics http://bigred.redbubble.com/
I should have changed all the seals when I swapped the knuckles over to the MQ stuff, but I didn't know if I should buy an MQ kit or GQ kit for all the stuff in the knuckle itself.. Now that I have done it I know that all the GQ seals fit back into the MQ knuckle, so I get to pull it all apart again! Joy!
big red wrote:tried the slide hammer bit last week ...gave up and hit the seal inwards with a screwdriver to bend it out of shape and it then came out by hand.
shane
[ i may be rough but i'm expensive ]
this is how i do mine ROFL
i hate pulling these things apart....
the seals are all of $2.70 per side from memory, and im probably stretching my ring a bit at that!
hands and mums dont count!!!
Who is online
Users browsing this forum: No registered users and 2 guests