Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 series lift

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 68
Joined: Sun Aug 17, 2003 10:32 pm
Location: Melbourne

Contact:
Contact Eric

100 series lift

Post by Eric »

I am about to lift a 100 series & am looking for advice with witch way to go , I need to acheive a 4 inch lift to fit 37 inch tyres . I was told best bet was big balls off road , others say some 4 inch springs long travel chacks , standard arb camber kit , adjust the bump stops and the jobs done . would love hear from anyone with insite to this delema of mine


thanks in advance.

Ps , are there diff gears available for the 100 series and if yes , who and how much ?? thanks guys & gals
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

IFS or Live axle?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: 100 series lift

Post by bogged »

Eric wrote:I am about to lift a 100 series & am looking for advice with witch way to go


Upwards.
Top
Posts: 68
Joined: Sun Aug 17, 2003 10:32 pm
Location: Melbourne

Contact:
Contact Eric

Post by Eric »

MKPatrolGuy wrote:IFS or Live axle?



its a live axle 98 ,
Top
Posts: 26
Joined: Thu Jun 12, 2003 5:40 pm
Location: Sydney

Post by timo_ed »

Got a mate with a 2000 hungie and he runs a 4" spring lift and 315's on the factory alloys. Tires just fit.. they scrub the chassis rail on the rear but even the stockers do that.

Rgds,
Tim
Top
Posts: 653
Joined: Mon Jan 13, 2003 1:06 pm
Location: Tasmania

Post by BUNDERA »

what you said you were going todo sounds like the go. Make sure you post some pics up of before and after.

Good luck with it, should look great!

Nick
______________________
PRAISE THE LIFTED
Top
Posts: 191
Joined: Sat Dec 07, 2002 10:25 am
Location: Sydney

Post by dansTOYOwagon »

I have a friend with a hundred, petrol live axle, and has a 3-4" lift using all ARB gear. No body lift, and runs 35" simex's on factory alloy's. I would imagine that to run 37z, you would need a little more than 4" in the springs, or maybe just some body lift.

No matter what you do with springs and body lift, you will generally always get scrubbing on the chassis rails, or inner guards..... this is usually only fixed with wheels/spacers

Cannot advise for sure though ;) Speak to someone who can be sure. Cheers. Dan
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: Bing [Bot] and 0 guests