Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series and 40 series rear axle shafts

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

60 series and 40 series rear axle shafts

Post by bad_religion_au »

just a quick question, are the short side rear axle shafts from a 60 series the same length as the short side ones from a 40 series?

i know they are on the front.
Spit my last breath
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Yes, for 1979 and newer only.

Dave
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

they changed in 1979? :shock: did not know that
Spit my last breath
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Yup. The seals changed in Jan 1979 to a more robust one. The axle lengths also increased by a few millimeters.

Dave
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

beanz2 wrote:Yup. The seals changed in Jan 1979 to a more robust one. The axle lengths also increased by a few millimeters.

Dave
good to know, because my axles i wanna use are from a 1981 40 :D
Spit my last breath
Top
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

If a 60 series diff is 3" wider than a 40 series diff how can the axles be the same length? :?
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

Hamo wrote:If a 60 series diff is 3" wider than a 40 series diff how can the axles be the same length? :?
the 3 inches is added to the long side axle, while keeping the short side the same length

that's the reason the pumpkin gets in the way at the front when you put 60 diffs under a 40. it's "more offset" from center than 40/70 housings
Spit my last breath
Top
Posts: 138
Joined: Mon Mar 15, 2004 9:47 pm
Location: Gladstone

Contact:
Contact Hardcorr

Post by Hardcorr »

Does anyone know of a website that has this type of info available. I'm amalgamating a heap of 60 bits into a 40 and would love to know what is the same and what isn't.

Cheers
Corry
'98 80 4.5/Auto 40th Anniversary - Tour
'92 80 6.5V8TD/Auto/37's - Toy
VE HSV Senator 6.2/Auto - Play
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests