Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

trailer rims

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

trailer rims

Post by Rhett »

I have almost finished my new car trailer and I made it as wide as I could with the axles I ordered for my old trailer so the tires don't sit in the middle of thwe guards when looked at from behind. The rims I have currently are 14" 12 slotters I think they are about 5.5 or 6" wide. are there any rims I can get with the same width but deeper dished?
Its a wheelbase thing
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

U might be able to find some ut and flipped suunnies. what pattern is on the trailer?

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

ford sorry I forgot to mention that. I was thinking Id have to get some sunnys and get them modded. As the 12 slotters are held together with a big spot weld thing and you couldn't just lathe the centres out :cry:
Its a wheelbase thing
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

You could put spacers on between the rim and hub... not all that legal though
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Top
Posts: 947
Joined: Fri May 16, 2003 10:10 pm
Location: hervey bay

r

Post by humphey »

Rhett wrote:ford sorry I forgot to mention that. I was thinking Id have to get some sunnys and get them modded. As the 12 slotters are held together with a big spot weld thing and you couldn't just lathe the centres out :cry:
you can drill the welds and than turn the center round a bit and reweld in a new spot after u mod them :lol:
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

but the spot weld theing is about 15mm across
Its a wheelbase thing
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests