Hi guys,
So I got my truck backfrom the panel beaters and they did a great job on the panels and I now have a new Hayman Reese hitch towbar.
However, the imported rear wheel carrier did not fit so I got paid out for that.
All I wanted was a simple rear bar with wheel carrier and I decided to make my own.
I have seen heaps of tips of Outerlimits so do not need advice on the rear wheel carrier bit at this stage.
HOWEVER, am I oversimplfying things by planning to make a rear bumper by buying some C bar steel and having it cut\bent so it goes from rear wheels to rear corner and across back. Then I can fab some brackets out of 10mm plate to bolt it on.
I cannot find any pics on the net but I am sure people have done this before.
Thoughts?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Home made rear bumper for SURF
Moderators: toaddog, Elmo, DUDELUX
Home made rear bumper for SURF
Transport Engineering and Trucking Services
Archerfield Brisbane
Call Simon on 0407 628 191 and say Clown Boy sent you
He will look after your rig, trailer or fleet.
Archerfield Brisbane
Call Simon on 0407 628 191 and say Clown Boy sent you
He will look after your rig, trailer or fleet.
Who is online
Users browsing this forum: No registered users and 1 guest