Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Decent Hand Brake on a Sierra Strewth

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Decent Hand Brake on a Sierra Strewth

Post by christover1 »

Final got around to hooking up the handbrake to the rear discs.
Fan bloody tastic.
Why didn't I do this yonks ago.
Works great, always works, and still works after a trip.

Tis strange, tho, as it don't rock back n forward anymore, on the driveline slack.


Drum on the tailshaft in theory is a great idea. But It never lasted more than 5 minutes, and shoes were gone again.

The rear discs chew pads a little quick, but still cheaper and longer lasting than drum brakes are to maintain.

I used all the cables and lever mechanism and clips from the Pintara the discs came off.

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
User avatar
Eff
Posts: 146
Joined: Sat Jan 01, 2005 11:14 pm
Location: Melbourne

Post by Eff »

Nice work christover1
Feel free to convert my rear's to disc and hooking up the handbrake too em :)
Ive been told rear discs can be really twitchy on sierra's (rear end slides out a lot), have you had any issues?

Eff
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

Eff wrote:Nice work christover1
Feel free to convert my rear's to disc and hooking up the handbrake too em :)
Ive been told rear discs can be really twitchy on sierra's (rear end slides out a lot), have you had any issues?

Eff
I haven't had any probs. Mines a 1.0 litre, hence no power booster. I don't know if that makes a difference.
But with any changes, learning the car's new handling is important.
There is a small spring valve thingy that holds slight fluid pressure on the rear wheels, needed for drums to function, in the master cylinder.
This can be removed to help rear discs work better.
You can also use brake bias in the line, which some zooks already have.
Some people use different pads front and rear, or different sized discs to help bias.

Most of the hard work was done by a mate (sr20 zook owner)
I'm sure he'd make some more conversion plates, but its a lot of work, and not cheap.
Rather good tho, especially after mud, as brakes still work :)

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

I trimmed down the old handbrake drum, today, this will give me a cleaner underneath, less to hang up on :)

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Another great advantage is that you've actually got decent brakes if you have to back down a hill!
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

Damo wrote:Another great advantage is that you've actually got decent brakes if you have to back down a hill!
It's a zook, we never back down :D

yes, your right, its very nice.

I get another tailshaft Wednesday, :armsup: so then we go for a good test run :cool:
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest