Throttle cable

Post by **marko** » Wed Jul 05, 2006 9:05 pm

Does any one know where I could get a custom throttle cable made in perth, for a Holden 5L efi in a Gq patrol.
Any help would be great

Post by **Hoppy11** » Wed Jul 05, 2006 10:26 pm

What about the one from the 5.0 lt, I think Holden might use the same size fitting for the pedal, not sure though, when putting the VX Ecotec in I used the cable that was on it, all i had to do was take out the pedal, stick it in the vice and bend the top section out a bit to make the distance right, the pedal moved halfway before it would pull the cable, now it's spot on,
Hoppy

Post by **marko** » Thu Jul 06, 2006 7:55 pm

Cheers I will look into that

Post by **David_S** » Fri Jul 07, 2006 2:00 pm

Failing that try a motorbike shop.

Website · Post by **GRINCH** » Fri Jul 07, 2006 2:08 pm

i think a cable from a 6 cylinder vl will fit, i know it fits the patrol easily just not sure on the motor

Post by **Hoppy11** » Fri Jul 07, 2006 6:45 pm

Or you could find out what used in this convertion
Hoppy
http://www.outerlimits4x4.com/PHP_Modul ... ht=running

Post by **marko** » Fri Jul 07, 2006 10:30 pm

Bought the genuine one from the dunnydore. Few mods where it bolts to the fire wall. other than that, its perfect

Post by **Hoppy11** » Fri Jul 07, 2006 10:38 pm

Good one

Outer Limits 4x4 Board

Throttle cable

Throttle cable

Who is online