Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4 Runner woes

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 4
Joined: Sat Jul 01, 2006 7:36 pm
Location: Rockhampton

4 Runner woes

Post by Holden Guy »

I am new to this forum however I find it very informative.

I do have a problem that I am hoping someone can help me with. I have a 1986 Toyota 4 Runner which is fitted with a 1994 VR V6 Commodore motor and the auto gearbox. When it is running well it is a joy to drive but I have had to replace 4 crank angle sensor units over the past 5 years. According to the mechanic it appears that the sensors are getting a power spike which are frying the units but the mechanic cannot figure out how.

Has anybody else out there experienced this problem and if so, what can I do to fix it before my wife drives the car over the nearest cliff. :cry: Any assistance would be greatly appreciated.
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

mate do you have a

earth to battery?

earth to chassi?

earth to eng ?
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Re: 4 Runner woes

Post by ferrit »

Holden Guy wrote: what can I do to fix it before my wife drives the car over the nearest cliff.
might not be such a bad thing if shes still in it when it goes over ;) :lol:
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

put an exo cage on it before she doe's do it
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

ferrit and plowy,


Fken ha ha ha ha ha ha ha ha ha ha ha ha !

Thanks guys havent had such a good belly chuckle in ages.
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Post by toyrex »

Do you have the guard over the crank trigger also run a hard earth from the battery to where the engine harness earth is on the block on the passengers side under the coil pack
Adrian
www.chevtorque.com.au
Posts: 233
Joined: Tue Oct 11, 2005 7:35 am
Location: Bankstown

Post by Dingo »

Since it has had an engine swap I would be saying the same as others and make sure you have plenty of earths all over the damn thing.
To the Engine, chassis, gearbox, throttlebody, even run one from the CAS to the chassis.
Check your plus and wiring loom as well for a bad wire, look for anysort of modification or repair along the loom.
95 Surf 3.0l Turbo 2"lift, ARB bar+winch+Rear Locker
[url=http://rag4x4.hyperboards.com][i][size=134]R.A.G 4x4(Ruff~As~Gutts)[/size][/i][/url]
Posts: 4
Joined: Sat Jul 01, 2006 7:36 pm
Location: Rockhampton

Post by Holden Guy »

Thanks for the information. I'll spend the weekend running more earth wires. Just a question, what is the CAS (is this an acronym for something?). What do you mean by a guard over the trigger and what purpose would this achieve? Your assistance is greatly appreciated.

By the way, my wife read some of the replies and I should be back on solid food within the week.
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

Post by Cruzer! »

CAS - crank angle sensor
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

By the way, my wife read some of the replies and I should be back on solid food within the week.[/quote]

:rofl: yeah some women/most just don't have a sense of humor
Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests