I have a vit 1.6 carby (I think) and there is a green square plug on it.
Now the wiring loom on my sierra has a white triangle plug on it for the 1.3 carby.
What wire can I leave out on the green plug? Or are all 4 wires req?
If yes to ^, what wire do I have to add into the loom and how?
I am assuming it is a vit 1.6, the intake bolted up to the 1.3 motor.
If youse are unsure about it being a vit 1.6, then just ask joshnz1. I got it off him.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vit carby.
Who is online
Users browsing this forum: No registered users and 2 guests