I am planning to put 33's on my 75. I believe that they came standard with 32 splitties.In SA and nationaly you are legally allowed an 15 mm increase in diameter (is this correct?). So this would mean that I can legally run 33's. Just hoping to clarify my understanding.
Cheers
Patrick
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
The legality of larger tyers
Moderators: toaddog, TWISTY, V8Patrol, Moderators
32 to 33 = 1 inch.
1 inch = 25.4mm
You have answered your own question.
The size increase/decrease changes from state to state, but the National Draft Code (there is debate as to when it applies, if it will ever apply, and if state law overrides it - but that's a whole differnt story) - anyway the National Draft Code says 4x4 can go 50mm larger.
1 inch = 25.4mm
You have answered your own question.
The size increase/decrease changes from state to state, but the National Draft Code (there is debate as to when it applies, if it will ever apply, and if state law overrides it - but that's a whole differnt story) - anyway the National Draft Code says 4x4 can go 50mm larger.
____________________
Dan
[quote="v840"]I bet you're the kind of person, when you're railing someone in the ass
you don't even have the common courtesy to give them a reach around! [/quote]
Dan
[quote="v840"]I bet you're the kind of person, when you're railing someone in the ass
you don't even have the common courtesy to give them a reach around! [/quote]
Who is online
Users browsing this forum: No registered users and 10 guests