About to do the 5psd swap into my 82 diesel shorty, and we're planning on a drive-in, drive-out swap-over. Shafts are all lined up (am planning on doing the swap on a weekend, then measuring the required lengths and getting them made up on Monday), new clutch kit's sitting on my desk, getting a new rear main seal this weekend, etc.
The gearbox is an 85 petrol 5spd. I want to find a flywheel to have machined up and ready to go straight in to save dicking around. Are the flywheels the same on all models or model-specific? Does anyone have one they want to sell me?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
question about MQ models and flywheels
According to my Jan 86 parts book the Part Nos for flywheels are 12312-C6000 for the P40; 12310-C6800, -C6802 & C8700 FOR THE SD33 and different again for the L28 which also has a different one for the automatic.
When I put a 5 speed ex diesel into my P40 I had to shorten the main shaft and change the pilot bush from 3/4" to 5/8" ID. The OD was the same at 15/16". The clutch splines on the shaft matched up with my original clutch fine.
When I put a 5 speed ex diesel into my P40 I had to shorten the main shaft and change the pilot bush from 3/4" to 5/8" ID. The OD was the same at 15/16". The clutch splines on the shaft matched up with my original clutch fine.
1982 Patrol K160 SWB (MQ) 4L P40 Petrol with Megasquirt fuel injection and EDIS ignition. Warn 8274 winch with Gigglepin head
i got a flywheel for sd33 (3.3 litre diesel nissan) sittin in my shed condition in unknown i took it off the motor that i dropped into mine becuase i knew the one i had was in good nick welcome to come get it
bit of surface rust where the clutch plate sits prob suit a machining
came off a 5 speed 1984 model swb patrol mq
bit of surface rust where the clutch plate sits prob suit a machining
came off a 5 speed 1984 model swb patrol mq
No sig line pics please.
if you were talkin to me i'll give it away for $404130warrior wrote:awesome mate... how much you want for it? i need it asap, i'll have some money for it on Friday...
edit: sorry, scratch that mate, i found one...
btw i have sent u a pm with my number ur welcome to pick it up today or tonight tomorrow upto u
No sig line pics please.
Who is online
Users browsing this forum: No registered users and 3 guests