Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Q for the newy crew

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 94
Joined: Tue Apr 18, 2006 8:25 pm
Location: South West VIC

Q for the newy crew

Post by joe crothers »

to the newy crew. Just wondering if anyone could recommend a panel beater up that way that could do some panel trimming to my brothers
GU, he has just fitted 37" creepies on his wagon. It has a 5" spring lift
and just needs a bit of a trim in the wheel arches. He is moving up there
this weekend from VIC and knows no one in you area. The rear quarters
have already been chopped and no original bar.
Top
Posts: 57
Joined: Sat Dec 25, 2004 11:24 pm
Location: Newie

Post by GUHOON »

What suburb is he moving too?
Any decent panel beater in the area should be able to take care of it.
GU ZD30#2 , 4 inch T/D lift, 33inch MT/Rs, 35 inch buckshots, sliders, snorkel, dents and scratches.Now with front locker and rockhoppers.......GO THE NISSAN!!!!!!!!!!!!!!
Top
Posts: 94
Joined: Tue Apr 18, 2006 8:25 pm
Location: South West VIC

panel shops in newie

Post by joe crothers »

thanks mate he is actually moving to Singleton. Just thought Id suss it out for him before he gets up there. He should find some one no worries
cheers joe
Top
Posts: 853
Joined: Fri Feb 10, 2006 6:38 pm
Location: Newcastle

Contact:
Contact Mick.

Re: panel shops in newie

Post by Mick. »

joe crothers wrote:thanks mate he is actually moving to Singleton. Just thought Id suss it out for him before he gets up there. He should find some one no worries
cheers joe
Singleton is a fair way out of Newcastle mate. I'm sure there would be plenty of panel shops up there that would do the job. ;)

Cheers Mick.
Top
Posts: 2298
Joined: Sat Jun 11, 2005 11:26 pm
Location: nsw maitland

Contact:
Contact cooter

Post by cooter »

adamthwait (sp) smash repears in the book do a good job
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Top
Posts: 9
Joined: Tue Mar 01, 2005 8:47 pm
Location: Newcastle,NSW

Post by otis05 »

I recommend Spectrum Smash Repairs at Gateshead. contact is brendan Dipper - good job, insurance or cash.
Top
Posts: 57
Joined: Sat Dec 25, 2004 11:24 pm
Location: Newie

Post by GUHOON »

I recommend whatever panel shop Mick. works for :D :armsup:
(do i get a spotters fee Mick) :twisted:
GU ZD30#2 , 4 inch T/D lift, 33inch MT/Rs, 35 inch buckshots, sliders, snorkel, dents and scratches.Now with front locker and rockhoppers.......GO THE NISSAN!!!!!!!!!!!!!!
Top
Posts: 94
Joined: Tue Apr 18, 2006 8:25 pm
Location: South West VIC

gu panel trimming

Post by joe crothers »

thanks to those who RECCOMENED a panel beater with a name and direction for us. A tradesman who has done this job or similar is better
than one who doesnt understand the articulation of a GU with these size
tyres and the exact radius that needs to be trimmed.

joe
Top
Posts: 853
Joined: Fri Feb 10, 2006 6:38 pm
Location: Newcastle

Contact:
Contact Mick.

Post by Mick. »

GUHOON wrote:I recommend whatever panel shop Mick. works for :D :armsup:
(do i get a spotters fee Mick) :twisted:
I'd be lucky to get a spotters fee myself off the tight asses I work for. :rofl:

We don't do that sort off work except our own 4wds :armsup: . We only do insuranace work and new car warrenty work for dealerships.

I cant think of anyone off the top of my head that specialised in that type of work but i'm guessing anyone that does restoration work would quite happily do it. ;)

Cheers Mick.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 131 guests