Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

radius arm spacers for gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 88
Joined: Thu Nov 17, 2005 10:23 pm
Location: traralgon, vic

radius arm spacers for gq

Post by mattlux »

can anyone please help me with what thickness radius arm spacers you can put in a gq
Top
Posts: 535
Joined: Sat Feb 05, 2005 9:57 am
Location: Oakleigh, Victoria

Post by of4x4 »

This might be a good place to start - the title says GU, but I believe that the GQ/GU are the same.

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=81384
Top
Posts: 83
Joined: Tue Aug 23, 2005 11:26 pm

Post by jimsaq »

I just fitted some to my GU tonight - 12.5mm - I snapped a couple of pics which you might help give you a bit of an idea how they'd go on your GQ:


arm without spacer

with spacers (flash didn't go off doh!)
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

how much do ppl want for these in melb or delivered to melb

thanks
glenn
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: radius arm spacers for gq

Post by bogged »

mattlux wrote:can anyone please help me with what thickness radius arm spacers you can put in a gq
10-12mm spacers seem common, depends how much you need to move the arm.
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

GQ Bear wrote:how much do ppl want for these in melb or delivered to melb

thanks
glenn
I think there about $60, but got them with a whole heap of bushes so not 100% sure.
I got mine from Ontrack in East Keilor. Pretty sure cheezyracing still do them also ProComp would have them. And if they dont they would get them for you.
Smithies Outback acc would also have them.
THOUGHT FOR THE DAY....
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

Are these spacers just 10-12mm peice of tube?

Can some1 give me dimensions so i can make some up. Will take a couple of mins.

Jimmy
GQII Patrol YAY!!
Top
Posts: 88
Joined: Thu Nov 17, 2005 10:23 pm
Location: traralgon, vic

Post by mattlux »

dimensions would be great so i can machine some up, and why do they use the two bushes instead of a single one
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

jimsaq wrote:I just fitted some to my GU tonight - 12.5mm - I snapped a couple of pics which you might help give you a bit of an idea how they'd go on your GQ:




with spacers (flash didn't go off doh!)

IS THAT WHAT THEY CHARGE $60 FOR?

wouldn't a couple of 16mm washers do the trick? Or a steel bush with a 16mm hole in it?
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 83
Joined: Tue Aug 23, 2005 11:26 pm

Post by jimsaq »

washers probably wouldn't be crash hot especially for the thread end but some bushes made from suitable material with the right holes would probably do the trick, sure
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

There's two bushes because one pushes the arm forwards and the other slides over the threaded part the same length to protect it. I'll make some up soon too. One thing I've noticed is you first fit the washer, then rubber, then bush. I think it would be easier to make a smaller bush that goes on first, then assemble as normal, but still with the smaller one over the thread, if you know what I mean by the difference. Might run up a batch if anyone interested. Powder coated or zinc anyone? Actually, could do some in aly and anodize!
Top
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

Post by dwaynes »

BowTieGQ wrote:There's two bushes because one pushes the arm forwards and the other slides over the threaded part the same length to protect it. I'll make some up soon too. One thing I've noticed is you first fit the washer, then rubber, then bush. I think it would be easier to make a smaller bush that goes on first, then assemble as normal, but still with the smaller one over the thread, if you know what I mean by the difference. Might run up a batch if anyone interested. Powder coated or zinc anyone? Actually, could do some in aly and anodize!
Im intrested let me know when you have it organised and what sort of dollars.
www.mudrhino.com.au
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

dwaynes wrote:
BowTieGQ wrote:There's two bushes because one pushes the arm forwards and the other slides over the threaded part the same length to protect it. I'll make some up soon too. One thing I've noticed is you first fit the washer, then rubber, then bush. I think it would be easier to make a smaller bush that goes on first, then assemble as normal, but still with the smaller one over the thread, if you know what I mean by the difference. Might run up a batch if anyone interested. Powder coated or zinc anyone? Actually, could do some in aly and anodize!
Im intrested let me know when you have it organised and what sort of dollars.
x2, don't care about material used really. so long as it's cheap and doesn't rust or break
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
User avatar
Vulcanised
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

i made my spacers and they fit between the radius arm and the steel washer.... no dramas at all.
There is no "I" in Team, but there are 5 in Individual Brilliance
Top
Posts: 1698
Joined: Sun Nov 28, 2004 7:26 pm
Location: Canberra Australia

Post by Ezookiel »

Pardon my ignorance, but what does the thing you've put the spacers on actually do, and what advantage is there to putting spacers on them?
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Top
User avatar
Vulcanised
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

Ezookiel wrote:Pardon my ignorance, but what does the thing you've put the spacers on actually do, and what advantage is there to putting spacers on them?
the radius arms go from your chassis to the front diff. The spacers often stop your tyres from rubbing on the back of the guards on full lock by moving the diff forward a few mm
There is no "I" in Team, but there are 5 in Individual Brilliance
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests