Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tray ideas for the 60

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 191
Joined: Sat Dec 07, 2002 10:25 am
Location: Sydney

Tray ideas for the 60

Post by dansTOYOwagon »

YES!! Need some ideas for the tray on my 60 (see members area if this doesn't quite sound right to you ;) )

The tray will only be about 1200 long
Will have a roll bar

Not too sure on what to do with width. I am pretty sure I will make it a couple of inches wider than the cab, but should I make it wide enough to cover the tires. Will be cruiser diffs with 3" spacers, and 15x8's with 12.5's. So they will hang out a fair way.

Also for the roll bar, I am thinking of just making the supports come diagonally down the outer sides of the main hoop(s), all the way to the back corner of the tray. The main reason being if I eventually need, I can put mesh or something in the triangles, to keep stuff on the (little) tray. Also would prolly look a little neater that way, with them going all the way to the back

Thoughts/ideas/suggestions

Also, does anyone have the links to pages of trays on utes that were posted up here once. Or anything similar??

Cheers. Dan
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

http://www.pirate4x4.com/forum/showthre ... did=164867

this has a few trays in it

:)

Tim
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

copy guts or hypolux
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

N*A*M wrote:copy guts or hypolux


:finger: :finger:
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Im busy DAN sorry :oops: :D

But yeah a mini copy of bens would be cool just with ya mesh floor :cool:
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

STYLESIDE!
hands and mums dont count!!!
Top
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

bj on roids wrote:STYLESIDE!


What he said.

Bobbed 75 tray might work since the 60 and 75 were both styled by the same design studio in Milan :D

Can you make one out of the old rear 1/4s, rear doors and tailgate?
Last edited by 2car on Mon Aug 25, 2003 7:52 pm, edited 1 time in total.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

You could make a tapered tray out of 100x75 rhs. Tapered - Same width as the cab at the front of the tray, taper it out to full width of track, straight section over wheels, then taper back to width of chassis at rear.



.....| CAB |
.....|_______|
..../.....T...... \
../.......R.........\
.|.........A.........|
.|.........Y.........|
..\................../
....\________/

Not to scale...
Built, not bought.
Top
Posts: 263
Joined: Thu Mar 06, 2003 7:55 pm
Location: Bayswater

Post by Fathillbilly »

there are a few pics of my tray here

http://www.outerlimits4x4.com/PHP_Modul ... php?t=6140

it might give you some ideas
[quote="COOP"] By the way Mr engineering Guru maybe you better get another calculator or learn how to use it![/quote]
www.indurooffroad.com
44mm and 38mm Roll Cage Tube
Eibach Springs SAW Shocks
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I really like this bed. My next incarnation of the zuk will hopefully have a tray like this
Ransom note = demand + collage
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

grimbo wrote:I really like this bed. My next incarnation of the zuk will hopefully have a tray like this


yeah its nice hey altho i dunno bout the weight of the spare up so high :?: :?:
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

yeah I wouldn't be putting the tyre up there


here is a link to a whole bunch

http://www.pirate4x4.com/forum/showthread.php?s=&threadid=164867
Ransom note = demand + collage
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

redzook wrote:http://www.pirate4x4.com/forum/showthre ... did=164867

this has a few trays in it

:)

Tim


grimbo wrote:yeah I wouldn't be putting the tyre up there


here is a link to a whole bunch

http://www.pirate4x4.com/forum/showthre ... did=164867


to slow :finger:
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests