Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

efi fuel lines?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

efi fuel lines?

Post by jtraf »

Installing an efi engine into the zook....

Am using a vitara tank just want to know what others have done with the fuel lines. Replace metal lines complete or just use efi fuel hose either end of the orginal metal fuel lines on the sierra?

James
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

yep, thats wat i did, works fine.
buggy time............
Top
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

I just used the metal lines with EFI fuel hose either end. Might not be technically correct but it worked.
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Barathrum wrote:I just used the metal lines with EFI fuel hose either end. Might not be technically correct but it worked.
I have used this approach also... it works fine.
DMA Founding Member #1 - Now Retired
Top
Posts: 391
Joined: Tue Oct 26, 2004 6:50 pm
Location: brissy

fuel

Post by benjamin78au »

i ran new lines, and fitted the external pump, above the chassis, main reasons for it , is i knew it was new, and more fuel up that way the better, put it in a protective surround.

If somthing ever breaks then it is easy to get to pump or change fuel lines and was simple.

bj
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Make sure you are sitting down when you buy the EFI hose though :shock: It adds up quick. I have asked for it by the metre and the guys at enzed just look at you a bit strange and say that people usually buy it by the cm :D

The stock sierra hard lines are fine.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

greg wrote:
Barathrum wrote:I just used the metal lines with EFI fuel hose either end. Might not be technically correct but it worked.
I have used this approach also... it works fine.
did you guys give up on the hard lines all the way?
[url]http://www.vic.suzuki4wd.com/forum[/url]
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

looks like I will reuse the hard lines....

I will also make up a hard line from the tank to the end of the old fuel line. I will probably use a ZL Fairlane efi fuel filter at this junctions and two small piece's of efi line to join the lines and the filter. Then I only need a small piece from the end of the fuel line to the engine connection.....

All in all should only need about 30cm to 40cm all up.

Also have a couple spare parts cars lieing around so will see if I can salvage from there before I go out and buy new if needed cause hose is in need of replacement......
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 94 guests