Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

7" LIFT DEATH WOBBLES

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

i will be cutting a scollop out of gbox cross member tomorrow the rear tailshaft is close but i'm going to turn and see how it goes
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

tozook wrote:i will be cutting a scollop out of gbox cross member tomorrow the rear tailshaft is close but i'm going to turn and see how it goes
Notice you gave up and its in the trader section..

You couldnt fix your issues in the end?
Posts: 450
Joined: Wed Jun 30, 2004 3:54 am
Location: richmond nsw

Post by tozook »

it was lose wheel bearings i am think of parting it out as it not being used much anymore
Posts: 104
Joined: Thu Nov 03, 2005 8:17 pm
Location: cedar grove, qld

Shakes

Post by 2dextreme »

There are a lot of thing that can make the wobbles, Tie rod ends, panard rod bushers[ also check that the nut on the front panard rod is still tinghtas it do loosen on full tilt in big lifts] and the shims under the swivel hub bearings
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

i fixed a bad wobble in mine by re-adjusting the panhards. All i did was park it on flat level ground and removed the panhards at the adjustment ends. I adjusted them so that they slipped onto the mounts easily, and it has a small shake at 65kph and dissapears as quick as it arrives. drives a heap better now, and i have 6" springs
There is no "I" in Team, but there are 5 in Individual Brilliance
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests