Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Im New... Please Help

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 2
Joined: Thu Aug 03, 2006 7:59 pm

Im New... Please Help

Post by GreenZOOK »

Hi,

I've got an 85 sierra SWB and was wondering about what size tyres i could fit on it?

I've already fitted 2" longer Shackles, which gave about 1" lift.

Also, if i were to buy lifted springs (2" springs , total of 3" lift?) what other stuff would i need to buy? i.e longer shockies, longer brake lines etc.

if i did get the lifted springs rougly what size tyre would fit then?

Thank you
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

up to about a 29 inch tyre. with springs up too 31" you will need longer shocks try searching these this has been covered many times
[url]http://www.vic.suzuki4wd.com/forum[/url]
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

look in the bible aat the top of the Suzuki section nd all your answers should be there
Ransom note = demand + collage
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

I had a 1 and a half inch lift and was running 30's(have sence gone to 3") and they just used to rub in the rear wheel arch so 29's should be fine. I'm going back down to 29's because with the 30's there was no low range. So stay at 29's untill you can get some rock hoppers. Thats what i'm doing.
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Posts: 351
Joined: Fri Aug 13, 2004 9:47 am
Location: Canberra

Post by DiddyZook »

As you will learn, either by research via the bible (link at top of page, well worth reading) or by experience. Once you increase your wheel diameter anything over 30", you need to start looking at reduction gears (search rockhopper or Calmini in the bible) otherwise you will wear out clutches quick and lack the ability to tackle tougher obstacles slowly.
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

you can fit the biggest rubber you can afford just depends on how much chopping you want to do :D ... have a look at virtul lifts
[color=green]Vote Earth[/color]
Posts: 529
Joined: Thu Jun 03, 2004 6:07 am
Location: SEQ

Post by munga »

i've got some reduction gears in the for sale thread, if you choose to go that way..
ht zook with bog, rust and mt's

this is my wheelbase |<-------->|
Posts: 2
Joined: Thu Aug 03, 2006 7:59 pm

Post by GreenZOOK »

Sorry everyone for not responding sooner, ive been in sydney and havn't had access to a computer.

Thanks alot to all of you who have responded to my question, the info has been a great help.
Post Reply

Who is online

Users browsing this forum: No registered users and 68 guests