I have searched through the auto electrical and the nissan forums for info foud some but not what I need. can anyone post step by step instructions on how to setup a electronic distributor on a L28 engine. I dont want to use aftermarket parts. I want to use parts from some compatable type of nissan engine.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
electronic dizzy for L28 engine
Buy a Factory Electronic dizzy off any suitable L24, L26 or L28 at the wreckers.
You will need basically everything that connects to the dizzy on the dizzy side of the coil (there will be an ignition pack somewhere, depending on which model you steal it from).
Most common on later L26 and Early L28 sedan type cars (eg 280C etc).
You will need basically everything that connects to the dizzy on the dizzy side of the coil (there will be an ignition pack somewhere, depending on which model you steal it from).
Most common on later L26 and Early L28 sedan type cars (eg 280C etc).
Who is online
Users browsing this forum: No registered users and 0 guests