Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4K - 5K Sierra Club!

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 374
Joined: Mon Apr 24, 2006 12:10 pm
Location: Tamworth, NSW, Australia

4K - 5K Sierra Club!

Post by Aerenandmel »

I thought it would be a good idea for all the people with 4k Toyota donks to start a thread with a collection of specs, ideas and links for the 4K engine.

I would also like to know who else has this conversion so I know who too harass when I have a problem with mine.

I have an 81 SJ40 Sierra with a Toyota 4K-C donk & 5 speed...I plan on conveting it to auto.

Anyone know if the corolla trimatic auto will fit in with 50mm body lift and no body mods or do I have to mod the tunnel?

Links
http://www.answers.com/topic/toyota-k-engine

http://www.rollaclub.com/faq/index.php?title=Main_Page
Last edited by Aerenandmel on Sun Jun 18, 2006 12:09 pm, edited 1 time in total.
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

Ah the good old k motor. I use to compete in supersprints and hill climbs in Corollas. So have played around with them.
Go great with side drought webbers, more torque and even in the low rev range.
You can get 5k lite ace motors with autos 1500cc. Had one, but throw a rod at 7500rpm.
I also have a repair manual for the K series engine.
2k,3k-c,3k-h,4k&4k-c

Pm me if you have questions.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

i have 4k auto and youll have to mod the tunnel a bit the trimatic is a fair bit fatter than the zook box.i would also recommend a good tranny coolerthe biggest killer of auto boxes is overheating.
84 model hardtop, 86in wb, 36 iroks, locked front and rear, lux diffs, exo, power steer, fuel injected 4k corolla 1.3,auto transmission ,2in wheel spacers,3/4 elliptic rear
Posts: 6
Joined: Mon Feb 13, 2006 12:39 am

Post by nageset »

Mate, what a great Idea, I have a 5K and toyota 5spd in the 86 Drover.

forums here are good for info http://www.club-k.co.nz/

Also on the rolla club site there is a wikipedia with a heap of good tips.
Posts: 374
Joined: Mon Apr 24, 2006 12:10 pm
Location: Tamworth, NSW, Australia

Post by Aerenandmel »

what do ta know, A 1.3L Sierra carb bolts staight onto the 4K manifold. I had problems with the 4k carb flooding the engine when driving on anything steeper than about 30 degrees :bad-words: . but I could reverse up near anything. It is because of were the float is located. I tried the sierra carb and it went straight on, just had to turn the fuel inlet around. the Sierra carb is heaps better on fuel and doesnt flood so much going up hill, but it has slowed the car down. but I haven’t touched the jets or tuned it, just bolted it on and it ran good. :armsup: :armsup:
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Yeh,

I have got a 4k carb on my sierra. :) I have opposite issues. zook carb being usual zook crap carb with choke and jets blokking. no issues so far with toyo carb.

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

Was the carb a straight fit?
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

suzuki boy wrote:Was the carb a straight fit?
Which way, But yes either way they are. Only major difference is the choke system and the zook carb uses long bolts to bolt it down and the toy uses either studs in manifold and nuts or short bolts.

http://www.outerlimits4x4.com/PHP_Modul ... light=carb

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I used to run a 5K in my Sierra, with the carb flooding issue just put a couple of 2" lengths of fuel line on the two breathers in the carb
Ransom note = demand + collage
Posts: 374
Joined: Mon Apr 24, 2006 12:10 pm
Location: Tamworth, NSW, Australia

Post by Aerenandmel »

grimbo wrote:I used to run a 5K in my Sierra, with the carb flooding issue just put a couple of 2" lengths of fuel line on the two breathers in the carb
please explain, Im interested as with the 4k carb the car goes better. but I am unsure with what u are tring to explain.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I have to try and remember. If you look into the the carby there are two tubes that angle into the carb they are cut at an angle and stick about 1" into the carb. As you can tell I have no clue to technical names with the carbs. If someone can take a pic I can mark on it what I mean
Ransom note = demand + collage
Posts: 374
Joined: Mon Apr 24, 2006 12:10 pm
Location: Tamworth, NSW, Australia

Post by Aerenandmel »

Image
Are these the tubes you are talking about grimbo.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Aerenandmel wrote:Image
Are these the tubes you are talking about grimbo.

They are the float bowl breather tubes. Extending these will help with flodding.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

Bingo! They made a huge difference once I fitted the extended tubes to them, made a big difference on steep climbs
Ransom note = demand + collage
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Where do you extend them to? Into airbox or just into the carby intake head?

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I just extended them into the carby intake head, just made them about 2" longer
Ransom note = demand + collage
Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests