I am currently fitting a set of Marks reduction gears to my 60 that I got off a mate at a good price and done very low kms, however I have come across a small problem. The gears that he bought were for a transfer that bolts up to an automatic gearbox whereas my transfer bolts up to the manual gearbox. The difference being the transfer input gear (the one on the gearbox output shaft) for the manual gearbox has a seal runner and is around 5-6mm thicker where it goes onto the shaft and the transfer input gear on the automatic does not have the seal runner.
The question I have is does anybody have the gear that suits the transfer for a manual gearbox. The gear I am after has a seal runner as opposed to the automatic which doesn't. Marks wants $300 for a gear. I can get something machined up that will work fine I guess but I would rather have a proper gear if I can get it at a reasonable price so I thought I'd try here first...
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Marks gears for landcruiser
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Who is online
Users browsing this forum: No registered users and 1 guest