any would be greatcheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rear bar pics
rear bar pics
does anyone have any pics of there rear bar set ups they have done or had done after they have cut the rear quaters off i tried searching and found a couple but i might not have been asking the right Q of the search function any would be great
cheers
any would be greatcheers
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
RTD Racing
OFFROAD CARTEL
Last edited by GQ Bear on Thu Aug 17, 2006 9:46 am, edited 1 time in total.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
Temporary Australian
Nice Bar Patrolden. I'll be looking for a bar like yours too when I can afford it (have to sell my other Patrol 1st). So far the only people I've found online that make nice bars are ontrak 4x4 in Victoria (very similar to what you have). I've been considering driving to Vic to pick one up when the time comes. Couple of questions though. Is 80lsy_gq in the business of making these bars?(cause if he is I'm intersted). What sort of price range do these type of bars usually sell for? Is there anybody else in Sydney (or NSW) that makes bars as nice as patrolden's ?
He makes them, cost is 350ish for a rear bar which is a bargin, add freight say less than a hunge and your laughing. half the price of a cheezy or ontrack rear barSexy Fingers wrote:Nice Bar Patrolden. I'll be looking for a bar like yours too when I can afford it (have to sell my other Patrol 1st). So far the only people I've found online that make nice bars are ontrak 4x4 in Victoria (very similar to what you have). I've been considering driving to Vic to pick one up when the time comes. Couple of questions though. Is 80lsy_gq in the business of making these bars?(cause if he is I'm intersted). What sort of price range do these type of bars usually sell for? Is there anybody else in Sydney (or NSW) that makes bars as nice as patrolden's ?
i used 10mm plate as the mounts and incorporated some tow points into them by making them stick out past the bar, then oxying a hole in each side.
The pipe is 48mm outer diameter with a 3mm wall, so should be strong enough for my useage.
The side bars are then mounted back onto the chassis by use of plates and bolts.
Retained the original tow bar.
I have used some chequer plate on top of the bar to form a step (not in pic) from a side step, which looked good.
Just need to get some LED's to fit into the bar.
Here are a couple of pics.
The pipe is 48mm outer diameter with a 3mm wall, so should be strong enough for my useage.
The side bars are then mounted back onto the chassis by use of plates and bolts.
Retained the original tow bar.
I have used some chequer plate on top of the bar to form a step (not in pic) from a side step, which looked good.
Just need to get some LED's to fit into the bar.
Here are a couple of pics.
GQ Patrol with a few bits and pieces.
Who is online
Users browsing this forum: No registered users and 1 guest