Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

power steering

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 66
Joined: Mon Oct 18, 2004 8:31 pm
Location: Victoria

power steering

Post by jono_785 »

Hi guys,
Anyone got any idea were i may find a jimny power steering box?? i want bolt on and i beleive this is the box to look for already have a pump but have rang every wreaker listed in the suzuki bible and no one has one...

any idea on other places to look and what price i should be expecting??
thanks guys
Top
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

I got my complete jimny ps setup from suzi four wreckers in sydney, not sure on the price of just the box itself but i doubt it'd be cheap. A complete setup goes for approx $700 and i reckon the box is the most expensive part.
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Top
Posts: 66
Joined: Mon Oct 18, 2004 8:31 pm
Location: Victoria

Post by jono_785 »

cool thanks. ps was it easy to install? and does it work good
thanks mate
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

jono_785 wrote:cool thanks. ps was it easy to install? and does it work good
thanks mate
Jimny box is bolt on. Can't comment on their performance though, sorry.
Top
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

I have not yet finished the install due to uni work, but i think the extent of the jimny setup being straight bolt-on stops at the steering box. I have had to redrill the pump bracket to bolt onto the engine, pump bracket needed to be modified to allow adjustablility of the belt tension as it had no provision for this (the adjuster was probably on the aircon bracket on the jimny), and you need to fabricate a mount somewhere for the reservoir.

All in all theres not a huge deal of work to be done to fit it all up but i've just been doing it as time permits so its taken me a bit longer.

So jimny ps steering box = bolt-on
rest of the ps setup = small amount of fabrication needed

Geoff
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests