By Pass Filtration.
Can anyone supply me with any enlightening info on these systems, and where they can be purchased in Australia.
I'm particularly interested in the filter that uses the humble dunny roll.
Anyone heard of it ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
By Pass Oil Filtration systems
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Have a look at a bypass centrifuge instead, these are just as good as a bypass filter, if not better. You can buy them new from Mann + Hummel Australia, or get one from a wrecked TD5 land rover.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
oil filter
Bogged,
How did you go have you used or received anymore info about the bypass filter?
How did you go have you used or received anymore info about the bypass filter?
Dave, Nat, Braiden, Ethan and now Elizabeth
Bye Bye 80 Series............Hello XR6T
Bye Bye 80 Series............Hello XR6T
Re: oil filter
been there 2 times and dude was too busy (I didnt have spare time)...Toli wrote:Bogged,
How did you go have you used or received anymore info about the bypass filter?
Will get there on 31st this mth, have day off...
filters
2 Emails from Frantz Filters (sales@frantzfilters.com.au) regarding my 2.8L Diesel Hilux:
Hi Brad,
We only have two sizes (single and three element versions) at the moment that could be applied to your vehicle, one of these (the 3-stacker) is overkill. The single element unit comes in a kit form for $295 and will guarantee a factor of 4 extension of oil life. At the moment we have a special price on offer for $245. There are some additional fittings required to suit your engine as the thread on the engine is different to that on the fittings in the kit. So for $255 we will include the additional fittings (T-piece and adapters). Add freight and you're away. The question is where is 'up here'? QLD, NSW or NT? We don't yet have dealers in those states.
Replacement elements are sold in packs of 4 for $15.95. We can include one pack without additional cost of freight. I have attached an order form for your convenience. If you can give me a delivery address I can calculate freight.
Regards
Matt
Hi Brad,
Yes I am aware that the guy in Brisbane is an FTA lad. Unfortunately I don't have a fitting diagram for that model. This is something we are working on across the various brand/models of vehicle. If several of your friends are interested in purchasing these filters then I'll give you a sliding discount; $245 ea for 2 units, $235 ea for 4 or more units (& element pack at $11 ea for all cases). Pretty good eh? Also, freight to QLD is $18 per kit. If I know how many sets you wish to order I can review the freight costs and try & combine them all together to cut the costs for you.
As a rule of thumb the kit usually takes between 1-4 hours to install depending on the type of vehicle (petrol or diesel), model, etc. The diesel Hilux takes about 1-2 hours based on reports from other customers as far away as yourselves. The first thing to do is locate a mounting point for the filter (fire wall, unused mounting points on manifolds, spare battery locations) and this depends on how many after-market accessories have been added to the engine bay. Filter dimensions are approximately 25 cm tall x 12 cm in diameter (plus allow 5 cm for the clamp handle). You can use existing lumes to anchor and route oil lines about the engine bay.
There is an additional option for returning the oil and that is using a specialized swivel fitting that is placed in the oil filler cap. Installation of that takes 15 minutes and makes installation overall very easy. These cost $25 ea. No discount on this item as it's a costly import.
If you have any other questions just ask. Otherwise I'll await your decision on your friends, etc.
Regards
Matt
Hi Brad,
We only have two sizes (single and three element versions) at the moment that could be applied to your vehicle, one of these (the 3-stacker) is overkill. The single element unit comes in a kit form for $295 and will guarantee a factor of 4 extension of oil life. At the moment we have a special price on offer for $245. There are some additional fittings required to suit your engine as the thread on the engine is different to that on the fittings in the kit. So for $255 we will include the additional fittings (T-piece and adapters). Add freight and you're away. The question is where is 'up here'? QLD, NSW or NT? We don't yet have dealers in those states.
Replacement elements are sold in packs of 4 for $15.95. We can include one pack without additional cost of freight. I have attached an order form for your convenience. If you can give me a delivery address I can calculate freight.
Regards
Matt
Hi Brad,
Yes I am aware that the guy in Brisbane is an FTA lad. Unfortunately I don't have a fitting diagram for that model. This is something we are working on across the various brand/models of vehicle. If several of your friends are interested in purchasing these filters then I'll give you a sliding discount; $245 ea for 2 units, $235 ea for 4 or more units (& element pack at $11 ea for all cases). Pretty good eh? Also, freight to QLD is $18 per kit. If I know how many sets you wish to order I can review the freight costs and try & combine them all together to cut the costs for you.
As a rule of thumb the kit usually takes between 1-4 hours to install depending on the type of vehicle (petrol or diesel), model, etc. The diesel Hilux takes about 1-2 hours based on reports from other customers as far away as yourselves. The first thing to do is locate a mounting point for the filter (fire wall, unused mounting points on manifolds, spare battery locations) and this depends on how many after-market accessories have been added to the engine bay. Filter dimensions are approximately 25 cm tall x 12 cm in diameter (plus allow 5 cm for the clamp handle). You can use existing lumes to anchor and route oil lines about the engine bay.
There is an additional option for returning the oil and that is using a specialized swivel fitting that is placed in the oil filler cap. Installation of that takes 15 minutes and makes installation overall very easy. These cost $25 ea. No discount on this item as it's a costly import.
If you have any other questions just ask. Otherwise I'll await your decision on your friends, etc.
Regards
Matt
Kind Regards,
Brad
Brad
These guys make one of the best bypass oil centrifuges available. Fitted OEM to Land Rover TD5 engines.
MANN AND HUMMEL AUSTRALIA (PTY) LTD
40/8 Avenue of the Americas
Newington Technology Park
Newington NSW 2127
+61 2 9647 1700
+61 2 9647 1936
sales@mann-hummel.com.au
MANN AND HUMMEL AUSTRALIA (PTY) LTD
40/8 Avenue of the Americas
Newington Technology Park
Newington NSW 2127
+61 2 9647 1700
+61 2 9647 1936
sales@mann-hummel.com.au
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Emailed them on Monday still no replyISUZUROVER wrote:These guys make one of the best bypass oil centrifuges available. Fitted OEM to Land Rover TD5 engines.
MANN AND HUMMEL AUSTRALIA (PTY) LTD
40/8 Avenue of the Americas
Newington Technology Park
Newington NSW 2127
+61 2 9647 1700
+61 2 9647 1936
sales@mann-hummel.com.au
Kind Regards,
Brad
Brad
Since they are mainly an OEM supplier they don't have a lot of experience with aftermarket. Let me know if you don't hear from them in a week or so and I will chase it up for you.LuxyBoy wrote:Emailed them on Monday still no replyISUZUROVER wrote:These guys make one of the best bypass oil centrifuges available. Fitted OEM to Land Rover TD5 engines.
MANN AND HUMMEL AUSTRALIA (PTY) LTD
40/8 Avenue of the Americas
Newington Technology Park
Newington NSW 2127
+61 2 9647 1700
+61 2 9647 1936
sales@mann-hummel.com.au
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: Bing [Bot] and 3 guests