Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Brakes slipping

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 5
Joined: Wed Mar 01, 2006 9:41 pm

Brakes slipping

Post by Murray »

Brakes on a 1999 100 series (petrol) slip just before stopping. Brakes work normally but at the last second just before completely stopping it releases or lunges forward. But always pulls up. Pads and rotors are in good condition. Any ideas? What should I look for? Could it be the proportional valve?
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

not likely the proportioning valve, do you have abs? this may be causing your brakes to release slightly.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

I vaguely remember something at a training night for work about 100 series cruisers having a dot 5 brake fluid (silicon based) not like your dot 3.4. apparently it stuffs the brake components - might be something to look at. or see your dealer.
plenty of parts on the bench
Top
Posts: 5
Joined: Wed Mar 01, 2006 9:41 pm

Thanks

Post by Murray »

Thanks guys yes the car has abs its a GXL did cross my mind know little about it. It could also be a good time to change the fluid will try that today.
Top
Posts: 80
Joined: Tue May 02, 2006 11:55 pm
Location: The Go

Post by playdoh »

Could just be gas build-up under the pad, is it an auto?
Top
Posts: 5
Joined: Wed Mar 01, 2006 9:41 pm

Post by Murray »

Thanks playdoh it is a auto. Gas build-up what is that how would i fix it?
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 24 guests