Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Where to buy transfer gears ( melb )
Where to buy transfer gears ( melb )
Where is a good place to buy transfer gears and what sort/brand melb vic
and are they hard to fit or just have them fitted 92 wt.cheers ron
and are they hard to fit or just have them fitted 92 wt.cheers ron
Get them from the states.
Trail Tough have excellent service or Calmini, I have not bought anything from Calmini but the replies to my queries have always been fast and polite.
Don't forget to ask about the freight price and make sure it is marked Made In The USA to avoid GST. My stuff was on my doorstep in 5 days, it would be faster for you because mine sat in the depot north of Bris waiting to be delivered for 2 days.
Anyone can fit them for you here.
Trail Tough have excellent service or Calmini, I have not bought anything from Calmini but the replies to my queries have always been fast and polite.
Don't forget to ask about the freight price and make sure it is marked Made In The USA to avoid GST. My stuff was on my doorstep in 5 days, it would be faster for you because mine sat in the depot north of Bris waiting to be delivered for 2 days.
Anyone can fit them for you here.
I wasnt telling you they were overpriced spud, i had not looked at all into getting gearing, the only prices i saw were from american sites for 520AUD plus an assumed 100 for shipping, i was asking a valid question.munga wrote:bbm has the same gears for $999
PJ.Zook was telling me the $850 ones were overpriced.
good luck with your search.
4x4 obsession is at the end of high street in the industrial estate. I will be looking for some soon so might drop in in a month or so. Have some nice looking rigs out the front sometimes. Next time i drive past i'll see how much they are.
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
$529US = approx $705AUD + freightmistaboz wrote:4.9's $529
At that price it's almost worth importing a set and fitting them yourself.
They are still only a 4.9 reduction. The greater the reduction the greater the cost (usually)
Also see this thread http://www.outerlimits4x4.com/PHP_Modul ... hp?t=84302
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
4.9's should be fine for a 31 or 32 though?
I see what you are trying to say regarding supporting aussie businesses and totally agree with you.Also see this thread http://www.outerlimits4x4.com/PHP_Modul ... hp?t=84302
i run 6.5's in my case and can drive up a vertical brick wall in third gear. i was going to buy cheaper gears but am happy to pay the little extra, dont abuse hard, only buy once. the extra control i gained is impressive when it comes to driving up and down the steep stuff.
munch, munch, jeep for lunch.
If you want STRONG & RELIABLE TRANSFER CASE GEARS....
MARKS 4WD ADAPTORS has new "Gearmaster" low range reduction gears to suit Suzuki Sierra in production now. Available in approx 4 weeks time.
They offer a 108% reduction.
Standard Suzuki Gear Ratios
High Range 1.409:1
Low Range 2.435:1
Gearmaster Gear Ratios
High Range 1.6:1 = 14% Reduction over standard
Low Range 5.06:1 = 108% reduction over standard
MARKS 4WD ADAPTORS has new "Gearmaster" low range reduction gears to suit Suzuki Sierra in production now. Available in approx 4 weeks time.
They offer a 108% reduction.
Standard Suzuki Gear Ratios
High Range 1.409:1
Low Range 2.435:1
Gearmaster Gear Ratios
High Range 1.6:1 = 14% Reduction over standard
Low Range 5.06:1 = 108% reduction over standard
Who is online
Users browsing this forum: No registered users and 71 guests