Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
stero problems
Moderator: -Scott-
stero problems
hey guys... was out sat night and someone put both sub wires together( no wat happens whenu do that) sparks.... anyway every since then my radio makes a buzzin and crackin noise when the car in on or two clicks on key barrel.. all fuses are fine in amp and in line fuse
was wondering where else to look to make it work again?
thanks guys
was wondering where else to look to make it work again?
thanks guys
check RCA leads a each end and make sure then are not touching metal that can make that sound
also sound filter might have burnt out cheaper cd players have the filter bulit in with the wire how to fix that would be goto autobanr repco super cheap and pick up a sound filter and install it as what it says on the packet
or just get a new cd player there pretty checp these days and so many diffrent types
but check ya RCA's first
cheers justin
also sound filter might have burnt out cheaper cd players have the filter bulit in with the wire how to fix that would be goto autobanr repco super cheap and pick up a sound filter and install it as what it says on the packet
or just get a new cd player there pretty checp these days and so many diffrent types
but check ya RCA's first
cheers justin
No sig line pics please.
i finally fix the problem.. and a costly one at that. its the rca connecton on both the cd player and amp.. plus also fried a few wires behind the dash.. so now up for new amp and cd player..... so lesson to be learnt make sure got extended warrentry since mine out by 2 days now gotta pay for it all.... plus make sure all wiring is done well.
deck
sounds like you have blown the ground track on the pcb for the rca's. if its a pioneer deck i can have a look at it for ya, amps are pretty easy to fix, what brand/model? most power supply fets (IRFZ44) and output transistors are readily available and cheap enough.
cam
cam
[quote="75 cruser"]we want more donkey[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests