Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gemini 5speed gearbox behind 1324cc sierra

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

gemini 5speed gearbox behind 1324cc sierra

Post by elado »

Is there anyone out there who has done this conversion , or know 's how close they would be to lining up.also what difference in gearing .Any view's on this conversion would be appreciated.Is there any more on this subject in previous posts.
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

One question...why would you do that?
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

i am after a 5speed gear box that doesn't have the shifter overhanging the output shaft , this is the only gearbox that i have seen so far that is suitable.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Indeed, why is a gemini 5 speed better than a suzuki 5 speed?

I'm not aware of any real weakness in the suzuki box, and they are available 2nd hand.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

elado wrote:i am after a 5speed gear box that doesn't have the shifter overhanging the output shaft , this is the only gearbox that i have seen so far that is suitable.

Ok. Never heard of it being done. What's the application?
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

I wonder how the two gearboxes compare strength wise ?
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

sorry elado, but really, who cares? Not many people have actually broken sierra gearboxes. Sure, they wear a bit, but the newest sierra gearbox is about '98. What's the newest gemini box? 84?

By the time you resolved adapter plate, starter, overall length, output shaft length, mount, tunnel clearance, clutch actuation, flywheel, starter motor location & engagement, the Gemini box couldn't possibly be good enough to warrant the work.

Gemini's had relatively little more power and no more weight than a sierra stock. They are unlikely to have a lower 1st gear (sierra - 3.65:1)

I really can't see an advantage. I fyou have a shed full of gemini boxes and a broken sierra box, sell the gem boxes on Ebay and buy a god used sierra box.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

yeh i see your point steve , The reason is to get rid of the overhang at the rear of the box.I have seen late model jeep boxes with less overhang but they would be too expensive to buy.
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

what the hell are u tryin to do????????, if ur that keen on a jeep box go by a jeep.
buggy time............
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

i'm keen on a gemini 5speed gearbox not the jeep
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

What everyone is asking is WHY DO YOU WANT TO REMOVE THE SHIFTER OVERHANG. If you can give us more infomation we may be able to help you more.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

I am trying to have 5 speed gearbox & still be able too put volvo 4speed box behind it ,Like they have done over in sweden. That way i'l be getting all the highway gears & heaps of lower gears down to about 110to1.
Posts: 93
Joined: Wed May 31, 2006 11:26 pm
Location: craigs house

Post by Swamp Donkey »

drugs are bad :turn-l: maybe you should take some time to think about this process a little longer.
munch, munch, jeep for lunch.
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

i'l just do it :twisted: it will be cool :onfire:
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

I thought that's what you might be trying to do (the volvo thing).

Yes it would be possible, and depending on how you speak to :D it might be cool. But by the time you stuff around adapting the gemini box to the G13 as well as the volvo box to the gemi box, it will be cheaper and most definitly easier to just to throw a set of gears in the standard transfer case.

I am trying to think of some positives for doing what you propose, but I can't. If you want to do it just to be different, hey knock yourself out. ;)
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

Thats a 1.0 litre zook, which have a much shorter 4 speed gearbox than the 1.3's 5 speed is. Maybe you need an old 1.o litre zook, not a Maruti tho, as they are longer boxes. Or a Lwb for extra room.

A dude in our club had a swb 1.0litre zook with a Gemini deisel and box fitted, and there was not a lot of room left to connect it to the transfer box, without moving the t-case.

I believe you'd be better off to use the entire motor and box from any car with a short enuff box for ya need, less hassle.

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

Yeh , you have to mix & match between 410 & a carryvan gearbox.
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

lower tranny gears, lower highway speed,i want too keep highway speed as is with a fifth gear overdrive & have heaps of lower as well
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

elado wrote:lower tranny gears, lower highway speed,i want too keep highway speed as is with a fifth gear overdrive & have heaps of lower as well


Think about that. If you fit say Calmini 5.14 gears, you get much lower low range at around 127%, and about 18% high range reduction. BUT why would you fit the gears in the first place - to regain crawl with larger tyres. So, the high range reduction allows you keep resonable performance with these larger tyres on the blacktop. :roll: :roll: :roll:
Where is the issue with having your high range corrected for your larger tyres to regain normal (for a zook) road revs vs vehicle speed.


Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

elado wrote:lower tranny gears, lower highway speed,i want too keep highway speed as is with a fifth gear overdrive & have heaps of lower as well
What size tyres 7 what diff ratios r u running?
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

standard 85 nt lwb rocky sevens
Last edited by elado on Sun Sep 03, 2006 7:24 pm, edited 1 time in total.
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

Calmini 5.14 gears are too many $$$$$$
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

good luck tryin to find that volvo box i was goin to do this a while ago and could not find a box in wa. anyhow with the cost involved getting the box and volvo plus adaptors cross members etc etc it will be cheaper and easier to do the calminis.
buggy time............
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

Post by SiKiD_01 »

i dont think you will have enough room. looks like he has custom drive shafts too.

and why the hell does the dude on the site have 1 (or 2) spark plugs in his exhaust?

do you want a flame thrower as well?
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

i already have a gearbox 40 odd thousand on the clock, out of a 62 volvo amazon .It was written off in a smash. You can still get the parts for them as well. A bit of cutting a bit of welding , some :drinking:
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

A Gemini box is close on unburstable, 1.6, 1.8 all the way up to the 2.6 litre rodeo motor is the same internals. and there are plenty out there with serious power being put through them and still living a long happy life.

Now the logistics of the install may be a bit more difficult with quite a few custom parts .. once it's done and you get all the angels etc right .. it should be pretty good ..

Remember to beef up all the mounts etc .. and give us progress reports
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

cheers thats what i like to hear,the volvo is an extremely strong box as well.
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

5th gear in the gemini box is not real strong. 5th gear is an add on to the 4speed box from the 70's.
We use to break a circlip. But it was behind a turbo motor. So prob' wont be cause you any trouble.
Good luck, hope it works out for you.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Posts: 28
Joined: Mon Aug 28, 2006 10:27 am
Location: nsw

Post by elado »

Yeh thanks me too.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests