Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where do u buy castor adjusting plates from

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 210
Joined: Mon Jul 18, 2005 7:24 pm
Location: victoria

Where do u buy castor adjusting plates from

Post by chevJ40 »

im trying to find where to buy some castor adjusting plates from for the 40 series the wedge shaped leafs would be another description, any help would be great thanks
cheers
rob
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

give a guy named Dave at playtime 4x4 a call he is a 40 series expert and can get any 40 gear u need he has an awsome 45 tray there, call him on 0414394062
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Snake Racing do them. I bought mine fairly cheap from Fulcrum, theres bound to be one in your neck of the woods.

Extended shackles? Mine are 2 inches longer, worked out to be a 3 degree wedge, best get it on an alignment machine to see exactly how many degrees you need.
Top
Posts: 127
Joined: Mon Apr 18, 2005 7:37 pm
Location: Godwin Beach

Contact:
Contact mac1cruz

Post by mac1cruz »

RAY185 wrote:Snake Racing do them. I bought mine fairly cheap from Fulcrum, theres bound to be one in your neck of the woods.

Extended shackles? Mine are 2 inches longer, worked out to be a 3 degree wedge, best get it on an alignment machine to see exactly how many degrees you need.
Or Superior Engineering http://www.superiorengineering.com.au/index.php thats were i got mine from.
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

i've got them from ARB before.

and www.sor.com has a table that tells you what degree wedge suits what length shackle.

or just say no to shackle lifts :D
Spit my last breath
Top
Posts: 210
Joined: Mon Jul 18, 2005 7:24 pm
Location: victoria

not much

Post by chevJ40 »

only about an inch in shackle lift but its a dogey reverse shackly job
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

then redo the shackle reversal properly, after all this thing is being driven on our roads. :D
Spit my last breath
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest