Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
304/308 efi conversion
Moderators: toaddog, Elmo, DUDELUX
304/308 efi conversion
i am putting a 304/308 efi (whatever u want to call it) in to my 1977 2f fj45 ute and wondering if there is anything i should look out for when doing it?
NECKUPYAPARROT4x4
Tosa_03
Proudly sponsored by and part of:-
Tosa Racing Co.
Tosa_03
Proudly sponsored by and part of:-
Tosa Racing Co.
I have the VN engine in the middy done with a mark's kit. Ended up with the new engine mounts making the V8 sit higher than the old 6 (3F) That caused all sorts of problems with driveshaft angles and lengths. Had to jack up the gearbox 2in to get it all back into line. Lucky I had a bodylift!!!
Not sure if the 45 will have the same problem but watch out for it!!
Not sure if the 45 will have the same problem but watch out for it!!
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Who is online
Users browsing this forum: No registered users and 2 guests