Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU Tyre Sizes

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 20
Joined: Wed Sep 06, 2006 7:20 pm
Location: Central Queensland

GU Tyre Sizes

Post by oscar »

Hi Guys,

New to forum, and it's been a while since i owned a 4x4 so i'm going to ask some (possibly) stupid questions.

Just bought a '99 GU wagon 2.8lt TD and would like some help with regards to mods. I'm trying not to let costs blow out too much on this vehicle as my garage houses a number of other toys. Although i could see use for the 6lt engine out of my Clubsport in the Patrol...

1) Want to change the current road biased tyres to something a bit more capable off-road. 16" rims. What is the biggest tyre i can run under it whilst keeping reasonable offroad capability & without having to do mods to the body. The suspension is currently standard. It'll do a lot of highway km's to get to off-road locations so i need to retain reasonable handling.

2) I'm considering a lift. Nothing outrageous, probably 2" or so. It's my wifes car and she's 5' tall, she still needs to be able to get in. Recommendation on good brands, rough prices and also what other mods are required at various lift heights would be appreciated. If nothing else the car needs to be lifted to meet the height of my off-road trailer from the last 4x4 i had.

3)Engine performance. I know the 2.8 isn't the world's fastest beast but some basic advice on little things to give a bit of extra pep would be nice. Success with K&N (or other) air filters, exhausts, etc.

Thanks in advance.
Cheers,

Oscar

'99 GU 2.8 Turbo Diesel Wagon, 4" Suspension Lift, 285/75-16 STT's, Dual Battery, Hella Rallye 4000's.
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Re: GU Tyre Sizes

Post by Tiny »

oscar wrote:Hi Guys,

New to forum, and it's been a while since i owned a 4x4 so i'm going to ask some (possibly) stupid questions.

Just bought a '99 GU wagon 2.8lt TD and would like some help with regards to mods. I'm trying not to let costs blow out too much on this vehicle as my garage houses a number of other toys. Although i could see use for the 6lt engine out of my Clubsport in the Patrol...

1) Want to change the current road biased tyres to something a bit more capable off-road. 16" rims. What is the biggest tyre i can run under it whilst keeping reasonable offroad capability & without having to do mods to the body. The suspension is currently standard. It'll do a lot of highway km's to get to off-road locations so i need to retain reasonable handling.

2) I'm considering a lift. Nothing outrageous, probably 2" or so. It's my wifes car and she's 5' tall, she still needs to be able to get in. Recommendation on good brands, rough prices and also what other mods are required at various lift heights would be appreciated. If nothing else the car needs to be lifted to meet the height of my off-road trailer from the last 4x4 i had.

3)Engine performance. I know the 2.8 isn't the world's fastest beast but some basic advice on little things to give a bit of extra pep would be nice. Success with K&N (or other) air filters, exhausts, etc.

Thanks in advance.
Bilstien 2" lift kit, $1099 will let you fit 33" tyresm BFG AT 285/75R16 would be a good option and then unichip of similar the engine
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 250
Joined: Sat Sep 20, 2003 1:01 am
Location: sydney

Post by alki »

1. 285/75/16 BFG AT,MT,Good Year MTR,Cooper ST/C,STT
2.old man emu 2" lift~$1200
3.that 6lt will do ;)
GU III,3.0 di
Posts: 314
Joined: Sun Oct 17, 2004 7:46 pm
Location: Melbourne

Post by AndrewPatrol »

wait for 2.8 owners responses cos bigger tyres may really slow you and cause more frustration. 2.8 also have smaller drivetrains so just wait a bit b4 you fit that 6.0 lt ( be fun though)
Posts: 20
Joined: Wed Sep 06, 2006 7:20 pm
Location: Central Queensland

Post by oscar »

Thanks guys.

From my research thus far i have deduced the following:

a) Probably want to limit my tyre size on 2.8lt to 33" otherwise i lose too much.

b) Lift kits in the 2" range are much of a muchness as long as they are a reputable brand. All i should need to do are springs, shocks, steering damper, castor bushes (i think that's what they are called). I'm looking for both the lift and the extra articulation (i know...7" would be better for that), not just lift, which i suspect is all some cheaper kits do. What are the regular TJM and ARB kits like in this area?

c) I think genarally Cooper and Goodyear tyres get a better wrap as the BFG's has lost abit of favour in recent past due to downturn in tyre characteristics and a problem with craop build-up on the rim lip which causes the tyre to go down.. My only other consideration is that i get about a 38% on all bridgestone products. Are bridgestone MT tyres OK? The cost competitiveness will certainly weight on the decision.

I'm prepared to lose a bit of get-up and go. I have an overpowered RWD car and a dirtbike for fast fun.

6lt engine would be interetsing...a wheelstanding partol :roll: But unfortunatley i couldn't do that to my 9 month old car and just have it sit in the garage with no engine. I'm just a regular joe so i can't afford to buy another spare LS2 engine.

Thanks again guys. Really appreciate the help.

Keep the info coming.
Cheers,

Oscar

'99 GU 2.8 Turbo Diesel Wagon, 4" Suspension Lift, 285/75-16 STT's, Dual Battery, Hella Rallye 4000's.
Posts: 69
Joined: Tue May 09, 2006 9:58 am
Location: melbourne,VIC

Post by GU4me »

1) i just fitted 2inch tough dog lift to my 04 gu 3.0l couldn be happier alot of people say the tough dog no good but ive been involved with 4 cars with them and not a prob got mine for $1500 45mm adjustable shocks nice and big too, tough dog springs big bore steering damper. if you want to choose another brand i ould go for bilstien they do a shock and spring kit also.
also most would swear by the fact that you dont need a castor bush kit for a 2inch lift but after doin mine i have lost 3degrees positve castor. definatley recommend either castor bushes or get some radius arms like i just got. and if u dont belive your castor should be 3.3degrees do a castor swing on an alignment machine after the lift and see the difference.
rear brake line and rear diff breather also is at its limit with the 2inch lift.
2) fitted cooper stt 285/75/16 again very happy. did the pine forest at kangaroo island in deep mud not a problem at 30psi. did a beach also went down to 18psi through soft sand too easy. on the road also good did notice small power loss though and had too press the brakes a bit harder.
speedo 4km over at 100km/h
only thing ive noticed with bridgestone 4wd tyres they wear quite fast the factory allterrains lasted 40,000kms dont know bout their muds though.

just my opinions and experiences
good luck
Posts: 14
Joined: Sun Nov 07, 2004 7:46 am
Location: gladstone queensland

Post by MadDan »

just on tyre sizes

i've ran 295/75 16 bfg AT under my 3L (stock height suspension) and didn't really notice any loss of power.... they did srub a little under full flex.. but so did the stock 265's if i tried hard enough

currently running mickey thompson FCII's (back to a 285/75/16) and i find they are a better tyre (other than a little more road noise)
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

AndrewPatrol wrote:wait for 2.8 owners responses cos bigger tyres may really slow you and cause more frustration. 2.8 also have smaller drivetrains so just wait a bit b4 you fit that 6.0 lt ( be fun though)
Only drive line differences are Gearbox and lower diff gears (4.6). Axle are the same and transfercase is the same.
THOUGHT FOR THE DAY....
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests