Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hall effect distributor

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Hall effect distributor

Post by cloughy »

As above i'm chasing info on hall effect dizzy's for a 3.5 i have a mate wanting to turbo a 3.5 so i'll be hooking up microtech after market management which requires a hall effect dizzy, as in NOT vacuum advance it MUST have a module that controls timing and NOT vac advance, so the computer can control the timing, having vac advance means the timing wont retard enough under boost, which will end in tears, Thanks Matt
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

What about a crane or pertronic kit into the stock dizzy with the vac ad. removed and locked ? Otherwise a holden v8 dizzy modded to suit.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
DL
Posts: 299
Joined: Wed May 31, 2006 8:33 pm
Location: Bellarine, Brackistan

Post by DL »

Hi,

Jaycar have a Hall effect device for $20. You just need to find your own iron vane.

DL
Top
Posts: 11
Joined: Sun Aug 20, 2006 12:26 pm

Post by hell »

lumination makes the hall efect parts u want look via yahoo uk to find info on it went that way as was having dizzy probs my self untill i sorted it
lucas did not invent darkness they just perfected it
Top
Posts: 7
Joined: Sat Sep 17, 2005 12:01 am
Location: Devon UK & QLD

Post by Bull Bar Cowboy »

Will the Micotech control EDIS? If so, then junk the dizzy (but leave it in to drive the oil pump) and go for Ford EDIS8 ……… plenty about on eblag. Use a ford transit toothed wheel on the crank pulley and a Ford VR sensor………….. a few over here have done this mod and use Megasquirt or megajolt to drive it. That way you end up with a 12x12 timing map :idea: based on Manifold Absolute Pressure………… control of the EDIS8 module is by SAW & PIP ………..

BTW: all of the 3.5EFI dizzys are reluctance ring switching …… some to an amp on the side of the dizzy and some to a remote amp ……… but its just an amp to fire the coil…….. there is no timing control ………. Thats all crappy Lucas mechanical. :roll:


Ian
Top
Posts: 827
Joined: Thu Apr 28, 2005 7:52 pm

Post by F'n_Rover »

The microtech will direct drive coil packs. Cloughy knows this - got me stuffed why he is asking about crappy dizzy tech.

http://www.outerlimits4x4.com/PHP_Modul ... light=edis
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

F'n_Rover wrote:The microtech will direct drive coil packs. Cloughy knows this - got me stuffed why he is asking about crappy dizzy tech.

http://www.outerlimits4x4.com/PHP_Modul ... light=edis
Cheaper and its not for me ;)
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests