Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What a ba$tard !

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

What a ba$tard !

Post by Shorty40 »

Jut got my new ignition leads. Went to put them in. Who designed this freakin engine ? :bad-words:

Any tips for fitting spark plug leads to a EFI 4.2 GQ ? Without disassembling the bloody engine :?
Top
Posts: 158
Joined: Tue May 31, 2005 3:25 pm
Location: Melbourne

Contact:
Contact hdn177

Post by hdn177 »

sounds like fun i was going to do mine next week, maybe not then:)
Top
Posts: 59
Joined: Fri Jul 28, 2006 6:50 am
Location: Sydney

Post by Sexy Fingers »

If you think thats fun, try fitting them to an EF Falcon with coil pack ignition ;) . You could try fitting them with long nose pliers though, or start pulling things off.
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

you dont have to dissasemble anything? its quite easy, it just looks hard :)
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Looks like you can get to number 4 and 5 due to the inlet manifold. And number 6 appears to be covered by crap hanging off the inlet :roll:

I will have a proper go at it tomorrow.
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

jessie928 wrote:you dont have to dissasemble anything? its quite easy, it just looks hard :)
Are you talking about the EFI model ?
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

Had the same trouble when i was going to gap my plugs. Couldnt be tuffed taking EFI and gas stuff off.
GQII Patrol YAY!!
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Jimbo wrote:Had the same trouble when i was going to gap my plugs. Couldnt be tuffed taking EFI and gas stuff off.
Exactly. Mine is EFI and LPG too.

So what did you do ?
Top
Posts: 33
Joined: Sat Jun 17, 2006 7:20 am
Location: Gordon Vic

Post by stevepet »

Hope the leads help. Here is what I did.

Get one ten year old son with skinny arms show him what you want done and tell him you will give him five bucks if he gets it on. Pick him up throw him in engine bay the hold on to him really tight so he is nice and steady you have to hold him around the knees. When he has got it on get a pair of long nose pliers to make sure it is tight. Then crack a beer start engine and listen to it purr.
Have fun

Steve

92 Ti Efi Lpg and lots of scraped knuckles.

For such a big vehicle there sure is no room to work on them.
Top
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

I've got to do the tappets on mine, so I'll give it a birthday and do the plugs and leads while all the LPG stuff is out of the way.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

stevepet wrote:Hope the leads help. Here is what I did.

Get one ten year old son with skinny arms show him what you want done and tell him you will give him five bucks if he gets it on. Pick him up throw him in engine bay the hold on to him really tight so he is nice and steady you have to hold him around the knees. When he has got it on get a pair of long nose pliers to make sure it is tight. Then crack a beer start engine and listen to it purr.
Have fun

Steve

92 Ti Efi Lpg and lots of scraped knuckles.

For such a big vehicle there sure is no room to work on them.
and make sure you take kid out of engine bay before starting or will make a real bad squealing noise.... danm annoying.. :lol:
Top
zen
Posts: 195
Joined: Sat Mar 04, 2006 7:45 am
Location: england

Post by zen »

and they complain if its hot too!!
now when i was a kid...if i complained....
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

i think its the same a the tb45? i remember when i first got my GU i took off the plastic cover to see what it looks like underneath and thought fark that. i think il just leave it until one day when im really bored or when it really needs to be done
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

"So what did you do ?"

Well i found out when the last guy changed the head he used the iridium plugs and i just left them gapped as they were!!
GQII Patrol YAY!!
Top
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

j-top paj wrote:i think its the same a the tb45? i remember when i first got my GU i took off the plastic cover to see what it looks like underneath and thought fark that. i think il just leave it until one day when im really bored or when it really needs to be done
No they aren't. The TB45's are simple. Very good access. It only takes 5 minutes. I have pulled plugs and checked condition , and gaps many times. The TB42 EFI's are a worse design.

Heres a photo of TB45 plug access. Anyone got a pic of TB42 EFI.?


Image


_______________________________________________
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Here is the engine bay in question. Note, this is pre LPG conversion.

You can easily get number 1 and 2. Number 3 is a squeeze. Numbers 4 and 5 are under the intake and number 6 is under the brass coloured cylinder at the back.

Image
Last edited by Shorty40 on Mon Sep 18, 2006 10:57 am, edited 1 time in total.
Top
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

Gee thats cean, neat and tidy?????
GQII Patrol YAY!!
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

raptorthumper wrote:
j-top paj wrote:i think its the same a the tb45? i remember when i first got my GU i took off the plastic cover to see what it looks like underneath and thought fark that. i think il just leave it until one day when im really bored or when it really needs to be done
No they aren't. The TB45's are simple. Very good access. It only takes 5 minutes. I have pulled plugs and checked condition , and gaps many times. The TB42 EFI's are a worse design.

Heres a photo of TB45 plug access. Anyone got a pic of TB42 EFI.?


Image


_______________________________________________

what about the plugs back near the firewall? i cant remember exactly why i didnt change them when i looked but i remember one or two of them were hard to get to or something? its been a while since ive looked so my memory isnt the best
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

I use a simple short 1/2" extension with the plug socket and 1/2" sidchrome ratchet. Easy.

_______________________________________________________
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Shorty40 wrote:Here is the engine bay in question. Note, this is pre LPG conversion.

You can easily get number 1 and 2. Number 3 is a squeeze. Numbers 4 and 5 are under the intake and number 6 is under the brass coloured cylinder at the back.

Image
that is disgustingly clean :shock:
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Sorry, the GQ is stock as a rock. It is my daily driver and tow rig for the buggy. It doesnt generally go offroad, unless its to tow the buggy somewhere offroad.
Top
Posts: 23
Joined: Sat Aug 12, 2006 10:10 am

Post by djd2 »

See, if you brought a diesel, none of this would have to happen :lol: :lol:
Top
Posts: 222
Joined: Tue Apr 19, 2005 8:19 pm
Location: North Brisbane

Post by GQ96 »

Its the same as mine....except yours is a lot cleaner. I did the spark plugs a few weeks ago. Its a bastard and you hurt your knuckles a lot but it can be done. All i undid was the air pipe but not fully, only enough to move it a little bit just to give me just that little bit of extra room needed to do it. And you want a variety of different socket extentions cause each plug needs like a different length one to reach it......sort of. lol
Top
Posts: 273
Joined: Fri Jul 30, 2004 6:39 pm
Location: cranbourne

Post by embryo »

now arent they pretty :roll: you dont wanna see mine it dont look that... errrr.... good even after i clean it!
dont tell the missus
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

One of Marks mates at Suziworx did it while I was chatting to Mark about my buggy :cool:

He took the air pipe off to the manifold and away he went. Took him about 10 minutes :cool:

New plugs, leads, oils (gearbox and engine), oil filter, air cleaner, bled brakes and a full LPG tune up (with valve adjustments) have made quite a nice difference to the running of the GQ :armsup: Totalled just under $430.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 7 guests