Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

missing

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 228
Joined: Mon Oct 17, 2005 12:55 pm
Location: Taree Australia

missing

Post by rockrover »

i have a mk 86 L28 and its running real ruff ...have tryed new leads n sparks now what? ..also can some1 plz post up the firing order for this engine cheers
rn106r 100watt hid lightforce 30 inch light bar 1 ton tipper and more to come
Posts: 59
Joined: Fri Jul 28, 2006 6:50 am
Location: Sydney

Post by Sexy Fingers »

I know nothing about those engines, but if it's a six cylinder the firing order will be 1,5,3,6,2,4. There are many reasons it could be running rough. Have you checked the igniton points and gap, the condenser, the timing, and have you got any disconected vacuum lines or air leaks around the manifold or carby,causing the engine to get too much air and not enough fuel, and have you adjusted the valves and done a compression test?
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests