Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
spot lights
Moderators: toaddog, TWISTY, V8Patrol, Moderators
spot lights
Currrently have two lightforce XGT's on the bullbar. Was thinking about running another two on the roof/roofrack. Maybe 2 pencil on the roof and 2 spread on the bar.
Does anyone run this sort of setup and how much improvement did it make.
Also, for all you people who sell the HID conversion kits, would you sell an already converted set. Wouldn't mind going this way but don't want to mod them myself.
Burnsy
Does anyone run this sort of setup and how much improvement did it make.
Also, for all you people who sell the HID conversion kits, would you sell an already converted set. Wouldn't mind going this way but don't want to mod them myself.
Burnsy
"would you sell an already converted set. Wouldn't mind going this way but don't want to mod them myself. '
u mean spot lights already with HID ballast and bulbs?
im getting samples in now, hold ur horse for about 1 month or so, ill promise to cut outerlimits members so wicked deals, just need time to inspect the sample and make sure im selling high quality products, its bad for the both of us when i have Sh*t returned.
kind regards
phil
u mean spot lights already with HID ballast and bulbs?
im getting samples in now, hold ur horse for about 1 month or so, ill promise to cut outerlimits members so wicked deals, just need time to inspect the sample and make sure im selling high quality products, its bad for the both of us when i have Sh*t returned.
kind regards
phil
www.lookee.com.au
if you like i can trial them for free...philta wrote:"would you sell an already converted set. Wouldn't mind going this way but don't want to mod them myself. '
u mean spot lights already with HID ballast and bulbs?
im getting samples in now, hold ur horse for about 1 month or so, ill promise to cut outerlimits members so wicked deals, just need time to inspect the sample and make sure im selling high quality products, its bad for the both of us when i have Sh*t returned.
kind regards
phil
at no charge to you

What sort. Lightforce?philta wrote:"im getting samples in now, hold ur horse for about 1 month or so, ill promise to cut outerlimits members so wicked deals, just need time to inspect the sample and make sure im selling high quality products, its bad for the both of us when i have Sh*t returned.
kind regards
phil
what would be a ball park figure for lightforce, working on about $450 for the lights plus your fee?
nope not lightforce, supervision- the ones on ebay says supervision pffft when its clearly states xennonvision on the box. supervision is a well know brand over in asia and is a registered trademark. its what im currently use/trust and sell.
u can think of the ballast as a tranformer stepping up the voltage to power the xennon bulbs. its just like downlights, they require tranformers too. these basicly run high voltage/low current, compared to your standard bulb that runs on low voltage/high current.
chunkz- ur a funny one mate, im gunna get myself a set and continously turn them off and on, leave them burning constantly over a week or two. might dunk it in water now and then. inspect the build quality etc etc. they should use the same kits as the ones im selling now so i dont think ill have any problems with them. just hope the spotlight build and the rest of it is good. dont worry my first group buy will be close to the cost price anyways, i like to ditch out large numbers at cost price and get feedback, when i know they are reliable thats when i'll start retailing them. And i will provide warranty with the group buy so rest assured.
phil
u can think of the ballast as a tranformer stepping up the voltage to power the xennon bulbs. its just like downlights, they require tranformers too. these basicly run high voltage/low current, compared to your standard bulb that runs on low voltage/high current.
chunkz- ur a funny one mate, im gunna get myself a set and continously turn them off and on, leave them burning constantly over a week or two. might dunk it in water now and then. inspect the build quality etc etc. they should use the same kits as the ones im selling now so i dont think ill have any problems with them. just hope the spotlight build and the rest of it is good. dont worry my first group buy will be close to the cost price anyways, i like to ditch out large numbers at cost price and get feedback, when i know they are reliable thats when i'll start retailing them. And i will provide warranty with the group buy so rest assured.
phil
www.lookee.com.au
Re: spot lights
A set of XGT's that are already converted to HID?bruiser wrote: Also, for all you people who sell the HID conversion kits, would you sell an already converted set. Wouldn't mind going this way but don't want to mod them myself.
Burnsy
Yes. Can do. Either your XGT's or a brand new set.
New XGT's: Around $475.00
New 42 watt kits: Around $330.00
Thats a ball park figure without any labour or freight...
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Who is online
Users browsing this forum: No registered users and 1 guest