Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where to buy air hose?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 178
Joined: Sat Jan 14, 2006 3:14 pm

Where to buy air hose?

Post by beaver700 »

Gday,

Does anyone have any suggestions as to where I could buy some of that airhose that goes from the airbox to the intake manifold? I have cracked one on my sierra, and I wasnt sure if it was a genuine suzuki part, or if it can be bought at repco etc... I just dont want to waste half a day driving around the city if there is a good place I could go...

Any suggestions appreciated,


Thanks
Top
msh
Posts: 66
Joined: Sat Mar 05, 2005 12:08 am
Location: Melbourne

Post by msh »

I got mine from repco, the longest one they had in stock just fitted. Needed to tape it into the plastic bit on the airbox to get it to hold though.

I just re-read your post, do you mean the one that draws hot air from the shield on the exhaust manifold.
Top
Posts: 178
Joined: Sat Jan 14, 2006 3:14 pm

Post by beaver700 »

Hi,

Sorry, I acually meant the 'flexy' airhose that goes from the top of the airbox to the carbie. The reason I asked was because I needed to setup some sort of air intake like the one used below, and I needed somewhere where they could sell bits and pieces of rubber hose/ elbows , etc, preferably not repco, who usually just laugh in your face :oops: or would repco have these sort of things?


Bottom left corner...
Image

any suggestions
Top
msh
Posts: 66
Joined: Sat Mar 05, 2005 12:08 am
Location: Melbourne

Post by msh »

Yeah when i re-read your post i thought I had it wrong.
Don't know why repco would laugh at you. Just ring a few places.
Top
Posts: 424
Joined: Sun Jun 11, 2006 9:15 pm
Location: PMQ

Post by =SKB= »

Very clean engine bay there :cool:

Everything looks so new and shiny :D
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

yeah pity its not his engine bay.. :cool:
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

coil sprung zook too :cool:
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

RB zook wrote:coil sprung zook too :cool:
howz a bout a prize.
[url]http://www.vic.suzuki4wd.com/forum[/url]
Top
Posts: 178
Joined: Sat Jan 14, 2006 3:14 pm

Post by beaver700 »

Went to repco today, all they had was some blue ricer looking hose in an elbow shape, and they wanted $110.
Top
Posts: 779
Joined: Tue Sep 02, 2003 8:17 pm
Location: Penrith, N.S.W

Post by markil »

beaver700 wrote:Went to repco today, all they had was some blue ricer looking hose in an elbow shape, and they wanted $110.
Did you laugh at them?
Mark.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests