Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Destroyed King Pin Bearing

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 207
Joined: Thu Aug 26, 2004 11:14 am
Location: Queensland,Clontarf

Destroyed King Pin Bearing

Post by Hales231271 »

Hit a wash out a little to hard.
I felt it I can tell you.
It destroyed the lower RHS king pin bearing in the knucle.
The diff housing is a Bundera and laminated.
Everything was brand new!
I have never heard of this happening before and are scratching my head as to why?

Has anyone come across this before??

Cheers
Dazza
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

i hit a washout that hard that i broke the front springs and ripped out a rod end but swivel bearings were fine. id say it'd be more of an installation problem.
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

ripped one out because of stress in the king pin bolts afer falling off 38s at speed.... didnt repair it all at the time then next time out it all fell to shit.
turbos are nice but i'd rather be blown
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

I go through King pin bearing every 3-4 drives cause of the offset :oops:
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

Dazza I feel your pain too,
I hit a wash out at speed recently and bent the right ball on the diff on landing and smashed the left top king pin bearing to bits as well the left wheel bearings were damged too and everything was only 15months old
All fixed with new bearings through out and a lot of lovin' from the oxy too.
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests