i have managed to snap one of the mounting holes for my t700 auto, was wondering if it can be re welded or if its a throw away?
the crack is right through the middle hole on the drivers side belhousing/convertor housing
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
crack in t700 mounting
Moderators: toaddog, TWISTY, V8Patrol, Moderators
crack in t700 mounting
turbos are nice but i'd rather be blown
I've welded a few T700 bellhousings (Tig welded) but they are a really crap casting and a biatch to weld. Although the weld looked OK externally I know it was basically an aero bar inside. In cases like those I always warn the customer not to expect miracles.
Regards Andrew
Regards Andrew
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Who is online
Users browsing this forum: No registered users and 3 guests