Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2lt camshaft

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

2lt camshaft

Post by eliteforce32 »

hi guys is it acommon problem with the 2LT motor for the cam shaft to break??? and does the 3L camshft fit the 2lt :armsup: ?
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

never heard of it being a problem. 3l may fit but i'm not sure if its the same grind (duration etc).

also there are 2 kinds (2 different heads), one with rockers and the other with bucket/shims.

http://www.toyotasurf.asn.au/forum/ will know.
Top
Posts: 259
Joined: Fri Sep 10, 2004 11:32 am
Location: Brisbane

Post by Clown Boy »

I hae an engine you can buy if you want to strip it for parts.

'92 2LT surf
Transport Engineering and Trucking Services
Archerfield Brisbane
Call Simon on 0407 628 191 and say Clown Boy sent you

He will look after your rig, trailer or fleet.
Top
Posts: 314
Joined: Tue Nov 25, 2003 3:43 pm
Location: Sunny Coast

Post by BundyMonkey »

I havnt heard of it either. But if your chasing one I have one here in great condition as I got sick of rebuilding the POS so in goes a 1UZ
Before All toys there was the Landcruiser
Top
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

The cam in mine ended up in 3 pieces when my engine failed.
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

yeah mine ended in three bits aswell :cry: , but looking around for a new daily driver so i can deregister the old girl, thanks for ur help fellers
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests