Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

electrical or mechanical temp gauge

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 48
Joined: Wed May 25, 2005 10:08 am

electrical or mechanical temp gauge

Post by superg »

Hi guys i had a mechanical temp gauge from sprints but it was one of thos cheap ones and it has died, should have learnt i had one of these before and it done the same thing, after about a year it just doesnt move.

so i was looking at getting a new one, what would be a better choice, mechanical or electrical and also what are some good brands?
VDO? Speco?

thanks
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Go mechanical and Speco is not to bad a brand.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Post by bj42turbo »

ludacris wrote:Go mechanical and Speco is not to bad a brand.

LudaCris
I concer, I have a mech Speco

BJ
Posts: 48
Joined: Wed May 25, 2005 10:08 am

Post by superg »

thanks guys, ill look into it.
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

I just bought a speco mech tem guage and a voltmeter.

I put the temp sender in a boiling saucepan and it read 98 degrees. Close enough I figure.

The voltmeter was +/- 1 volt everytime I disconnected it. It also jumped at the voltage decreased so I'll take it back and get something else.
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests