Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU diffs, front and rear

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 56
Joined: Tue Sep 20, 2005 3:20 am

GU diffs, front and rear

Post by 90pickup »

I will run a GU front axle on my LR and a custom made rear GU on the back. Does a front ARB locker (31spline) fit into the rear GU third member? Is the ring and pinion the same front and rear? I also noticed that the splines on the CV`s are the same as on the shafts (both 31), correct? Cheers
Top
Posts: 51
Joined: Wed Jan 08, 2003 2:16 pm
Location: Melbourne

Contact:
Contact dbongard

Re: GU diffs, front and rear

Post by dbongard »

90pickup wrote:Does a front ARB locker (31spline) fit into the rear GU third member?
Assuming you have the small H233B rear as opposed to the large H260 rear, then the diff centres are interchangeable with the exception of the axle spline count (31 frtont, 33 rear). But you can swap over the 2 side gears inside if you need to.

daniel
AIR LOCKER
Top
Posts: 56
Joined: Tue Sep 20, 2005 3:20 am

GU

Post by 90pickup »

Thanks mate, you saved my day and the money for the christmas presents for the missus...........
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests