Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mannel 5" extreme lift

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 49
Joined: Wed Jan 21, 2004 8:48 pm
Location: Swan Hill Vic

mannel 5" extreme lift

Post by 92shorty »

Have just purchsed a GU patrol which has the Mannel 5" Extreme lift kit. My question is in relation to the disconnects for the rear swaybar. Do i only unpin one or both sides. If both are unpinned, will the swaybar not rotate and point towards the ground.

Also how much pressure is required to reinsert the pins

Cheers
George
2002GU Patrol, 3Lt TD, dtronic, 5" mannel extreme lift kit, rockhopper gears in auto box, Lightforce XGTs, 230 Lt fuel tanks, 35" BFG muddies, Rear drawers, opposite lock rear bar/tyre carrier& more
Posts: 1151
Joined: Sat Jul 23, 2005 1:48 pm
Location: Does lost count?

Post by midnight »

Dont you just stop at normal ride height, and then re-insert the connectors?

Would be the most logical way.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

depending which type, I remember roly saying his swaybar thing took 45mins to get back together one day.
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

yes, it will just swing towards the ground. You can tie it up or ziptie it so it doesent dangle asmuch.

and

if your swaybar is bent, it will be a right pain in the arse to get the pins back in.
you have to find unlevel ground to sit the car on and insert the pin.

OR, make up a lever to slide onto the end of the swaybar to lever it into place.

OR, straighten your swaybar.


Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

disconnects on a megalift will be snake, they should be reconnected at ride height, but they tend to be difficult at the best of times, it usualy needs someone to have a swing on the side of the car with somone else with he pin ready

plenty of people I knopw with tem just dont put them back in unless they are doing big road trip
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

You don't need any swaybars... :armsup:
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

agree, get rid of them altogether and drive slower round corners!
Nice gq swb ute chop with a huffer for the good times
Posts: 853
Joined: Fri Feb 10, 2006 6:38 pm
Location: Newcastle

Post by Mick. »

I don't run any sway bars. I could hardly tell the difference when they where in or out.

I have the snake racing disconnects and it was quicker for me to remove & refit a sway bar than what was to try and reconnect them. Thats why I just leave them off. LOL

Cheers Mick.
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

I had the same problem as above` And fixed it with the same solution.
GQ with big nuts
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

Post by Madmac »

whats a sway bar?, mine are behind the shed somewhere
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests