Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Buying a Freelander

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 22
Joined: Sat Jun 17, 2006 5:33 pm

Buying a Freelander

Post by daveSierra »

Hello All,

I am just in the process of selling my Sierra in favour of something a little bigger to accomodate the family.

One of my options could be a Freelander so I am just after a bit of advice here on purchasing a 2nd hand one.

I have done a bit of research on the www today and so far I have found only negaitve reports on the Freelander with numerous build quality problems and recalls.

Is this really the case?
Would be interested to hear from someone who owns one.
I am looking at 97-99 models.

Thanks.
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

about 99.99 % will say - WHATEVER YOU DO DO NOT BUY A FREELANDER, they really are pieces of crap. You would be better off with a pathfinder or other similar sized vehicle.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

I work on them and I would have to agree, Go the Pathy or a Honda CRV etc, the Freeloader was a good idea, it just didn't work.

JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

A fleet manager told me that they had been banned from purchasing them cause the motor is rubbish. Not sure if the latest models are the same, could be that they have fixed the issues now. They sold heaps in Europe though....
Nice gq swb ute chop with a huffer for the good times
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

I was told by my service fella when my Disco was dealer serviced that he wouldn't sell one to his worst enemy. Apparently the 4cyl ones blow head gasket, then head gasket then the motor. The V6's have auto tranny dramas, but apparently the TD4's are fine. I'm not sure if they still have funny tyre wear problems when run loaded.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 142
Joined: Mon Apr 24, 2006 6:33 am
Location: Hamilton Vic

Post by amshaw »

Mate dont do it....Try a pajero io....very good car, much better than a Rav 4 or Crv...trust me !
Andrew

'98 Disco TDi 300
'06 Rodeo 3L TDi Crewcab

"Put The Wet Stuff On The Red Stuff"
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Post by DionM »

Welllll ... as an owner of a Freelander ....

Pre-01 I wouldn't touch if it was a Petrol. The 1.8 is just too small and has headgasket issues. The early diesels are not bad however, but I've never driven or owned one.

After 01 the 1.8 and the old diesel were not sold here anymore - you can only get the V6 or the TD4. The V6 is a rover engine and the TD4 is a BMW engine. The auto was available with the V6 and TD4 only. You can get a TD4 manual, but not a V6 manual.

I would stay away from the early 01s as some did have problems. I have a late 02 V6 myself.

The automatic (5spd with steptronic) is the same for the TD4 and the V6 so not sure why the V6 would have any more problems than the TD4? There were some issues with the Auto but they should all be sorted. I have heard various theories as to why there were problems with them. The Jatco autobox is generally quite reliable though.

The funny tyre wear problem was related to the IRD and was fixed with the V6/TD4 versions. Most of the early diesels and petrols would have had it fixed by now anyway.

The V6 does have a propensity to have a failure with the variable intake manifold - not a show stopper, you just end up a fraction down on power. When its working, when you hit 3500rpm the intake length changes and it gets a surge of power - almost VTEC like. Actually the V6 has a superb induction noise ...

The TD4 is pretty good, loads of torque.

They are a great car if you get a good one. Very comfy ride, moderately capable off-road. Great interior space - I'm 6'8" and have more room inside than a Disco. The only drawback is the tiny boot.
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 25
Joined: Sat Sep 02, 2006 9:57 pm
Location: Eastern Subuurbs of Melbourne via England

Post by Animal Mother »

For what its worth I think they are nice, especially in British Racing Green.
I've ridden in one and it was nice.
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

....but also beware Mitsubishi - they can get horribly expensive to fix and maintain. Mitsu parts are very expensive if not the most expensive of all Jap cars and there's not many aftermarket subsitutes.....otherwise Paj and iO are decently made. Later RAVs are torsionally weak - jack up one corner and the doors won't shut properly. CRVs seem to be OK, perhaps they are the pick of the SYV bunch, although Zook V6 is also reasonable, bit underpowered but cheaper than CRV.
Nice gq swb ute chop with a huffer for the good times
Posts: 60
Joined: Fri Dec 19, 2003 11:41 pm
Location: Brisbane

Post by DionM »

The comment about torsion strength reminds me ...

People often claim the Freeo suffers the same problem. I have had mine lifting wheels and no rub marks in the doors etc.

Image

They are moderately capable offroad. Biggest drama is clearance, which means you often have to do this:

Image

Oh, the later model V6 and TD4s all had the traction control and Hill Descent Control. Traction control make short work of steep rutted climbs:

Image
Dion
01 I6 Jeep Cherokee Classic (ARB bar, OME 2" lift)
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

Interesting comments. Perhaps it's the 'Rover' bashing thing - one bad model and they are all ajudged to be crap. I'll have to be more cautious when hearing Freelander criticism. As I said, I was aware they had sold heaps in the EU, and when over there earlier this year, not one word of criticism was spoken about them - except the early petrol models, as has been said...
Nice gq swb ute chop with a huffer for the good times
Posts: 86
Joined: Thu Jul 15, 2004 1:54 am
Location: Brisbane QLD

Post by aliread »

well about the sub frame well my brother test them o the limits
here are some pics of both of his racers. The silver one is 1.8 and the red one is a TD5
And if you read Total Off Road. His is the one flying on the subcribtions page
Image


Image

Image

Image


Image

Image

In the Dakar
Image

Image

And in case you wondered this is what he races against


Image

Image
AKA Reads90

Its the way it shatters that matters
Posts: 25
Joined: Sat Sep 02, 2006 9:57 pm
Location: Eastern Subuurbs of Melbourne via England

Post by Animal Mother »

New Freeo looks nice!
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

well about the sub frame well my brother test them o the limits
here are some pics of both of his racers. The silver one is 1.8 and the red one is a TD5
And if you read Total Off Road. His is the one flying on the subcribtions page
I want his job!
Nice gq swb ute chop with a huffer for the good times
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests