Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Starter Motor Current
Moderator: -Scott-
Starter Motor Current
I have a old holden starter motor and i was just wondering how many amps a starter motor draws, i think it gets higher under load doesnt it, but does anyone know how to find out how much current it draws?
Hi superg, your correct about about the amps go up according to the load being put on it.
Free wheeling, a start motor can pull as little as 5 or 6 amps but to know what the loaded current is you should try and get your hands on a clamp meter.
With a clamp meter, you can measure the amps being draw by the motor without having to tamper with the cable going to the motor.
Cheers.
Free wheeling, a start motor can pull as little as 5 or 6 amps but to know what the loaded current is you should try and get your hands on a clamp meter.
With a clamp meter, you can measure the amps being draw by the motor without having to tamper with the cable going to the motor.
Cheers.
2007 TDV8 Range Rover Lux
2009 2.7 Discovery 4
2009 2.7 Discovery 4
Who is online
Users browsing this forum: No registered users and 0 guests